2B1Q

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Two-binary, one-quaternary (2B1Q) is a line code used in the U interface of the Integrated Services Digital Network (ISDN) Basic Rate Interface (BRI) and the high-bit-rate digital subscriber line (HDSL). 2B1Q is a four-level pulse-amplitude modulation (PAM-4) scheme without redundancy, mapping two bits (2B) into one quaternary symbol (1Q). Symbol rate is half of data rate. A competing encoding technique in the ISDN basic rate U interface, mainly used in Europe, is 4B3T.

Two-binary, one-quaternary (2B1Q) is a line code used in the U interface of the Integrated Services Digital Network (ISDN) Basic Rate Interface (BRI) and the high-bit-rate digital subscriber line (HDSL). 2B1Q is a four-level pulse-amplitude modulation (PAM-4) scheme without redundancy, mapping two bits (2B) into one quaternary symbol (1Q). Symbol rate is half of data rate. A competing encoding technique in the ISDN basic rate U interface, mainly used in Europe, is 4B3T.

Encoding

To minimize error propagation, bit pairs (dibits) are assigned to voltage levels according to a Gray code, as follows: If the voltage is misread as an adjacent level, this causes only a 1-bit error in the decoded data. 2B1Q code is not DC-balanced.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1317396859 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.