3D-printed spacecraft

3D printing began to be used in production versions of spaceflight hardware in early 2014, when SpaceX first flew a flight-critical propulsion system assembly on an operational Falcon 9 flight.

Uses your system voice; voice and rate in settings.

≈ 1 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

3D printing began to be used in production versions of spaceflight hardware in early 2014, when SpaceX first flew a flight-critical propulsion system assembly on an operational Falcon 9 flight. A number of other 3D-printed spacecraft assemblies have been ground-tested, including high-temperature, high-pressure rocket engine combustion chambers and the entire mechanical spaceframe and integral propellant tanks for a small satellite.

A 3D printed rocket engine successfully launched a rocket to space in 2017, and to orbit in 2018. An almost 90% 3d-printed rocket was launched to space on 23 March 2023 but failed to achieve orbit. On May 30, 2024, The startup Angnikul cosmos,(a private startup) in India makes a breakthrough by 3d printing a cryogenic rocket engine from scratch.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1366712246 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001366712246 · captured 2026-07-29 · ledger · version history

Cite this page as: encyclopegia.org, “3D-printed spacecraft”, snapshot enwiki-001366712246. https://encyclopegia.org/a/3d-printed-spacecraft

Sources cited in this revision

15 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.