3D tracking

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In 3D human-computer interaction, 3D tracking, also called pose tracking or positional tracking, is a process that measures an object's position and orientation in three-dimensional space, which is used for tracking head-mounted displays, handheld controllers, and other objects. 3D tracking is often referred to as 6DOF tracking, for the six degrees of freedom in which the objects are often tracked. 3D tracking is a core part of virtual reality (VR) and augmented reality systems. In some consumer GPS systems, orientation data is added additionally using magnetometers, which give partial orientation information. In virtual reality, it is paramount that pose tracking is both accurate and precise so as not to break the illusion of a being in virtual world. Several methods of tracking the position and orientation (pitch, yaw and roll) of a display and any associated objects or devices have been developed to achieve this. Many methods utilize sensors that repeatedly record signals from transmitters on or near the tracked object(s), and then send that data to a computer in order to maintain an approximation of their physical locations. A popular tracking method is Lighthouse tracking. Different coordinate systems can be used to process and store the 3D position data, including the Cartesian rectilinear system, the spherical polar system, and the cylindrical system.…

In 3D human-computer interaction, 3D tracking, also called pose tracking or positional tracking, is a process that measures an object's position and orientation in three-dimensional space, which is used for tracking head-mounted displays, handheld controllers, and other objects. 3D tracking is often referred to as 6DOF tracking, for the six degrees of freedom in which the objects are often tracked. 3D tracking is a core part of virtual reality (VR) and augmented reality systems. In some consumer GPS systems, orientation data is added additionally using magnetometers, which give partial orientation information. In virtual reality, it is paramount that pose tracking is both accurate and precise so as not to break the illusion of a being in virtual world. Several methods of tracking the position and orientation (pitch, yaw and roll) of a display and any associated objects or devices have been developed to achieve this. Many methods utilize sensors that repeatedly record signals from transmitters on or near the tracked object(s), and then send that data to a computer in order to maintain an approximation of their physical locations. A popular tracking method is Lighthouse tracking. Different coordinate systems can be used to process and store the 3D position data, including the Cartesian rectilinear system, the spherical polar system, and the cylindrical system. Another type of pose tracking used more often in newer systems is referred to as inside-out tracking, including simultaneous localization and mapping (SLAM) or visual-inertial odometry (VIO). An example of a device that uses inside-out positional tracking is the Oculus Quest 2. Given a set of three noncollinear sensors (or receivers) with distances between them d 1 and d 2 , as well as the travel times of an ultrasonic soundwave (a wave with frequency greater than 20 kHz) from a transmitter to those three receivers, the relative Cartesian position of the transmitter can be calculated as follows: x_0 = {l_1^2 + d_1^2 - l_2^2\over2d_1} y_0 = {l_1^2 + d_2^2 - l_3^2\over2d_2} z_0 = \sqrt{l_1^2 - x_0^2 - y_0^2} Here, each l i represents the distance from the transmitter to each of the three receivers, calculated based on the travel time of the ultrasonic wave using the equation l = ct us . The constant c denotes the speed of sound, which is equal to 343.2 m/s in dry air at temperature 20°C. Because at least three receivers are required, these calculations are commonly known as triangulation. Beyond its position, determining a device's orientation (i.e. its degree of rotation in all directions) requires at least three noncollinear points on the tracked object to be known, mandating the number of ultrasonic transmitters to be at least three per device tracked in addition to the three aforementioned receivers. The transmitters emit ultrasonic waves in sequence toward the three receivers, which can then be used to derive spatial data on the three transmitters using the methods described above. The device's orientation can then be derived based on the known positioning of the transmitters upon the device and their spatial locations relative to one another.

Mechanical tracking

Mechanical tracking uses physically connected linkages to determine the pose of an object. This is used in products such as the BOOM from Fakespace Labs.

See also

3D pose estimation Head-mounted display Indoor positioning system Finger tracking FreeTrack Motion capture Simultaneous localization and mapping Tracking system

References

Bibliography

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377836089 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

19 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.