Lesson plan
3Doodler
The 3Doodler is a 3D printing pen developed by Peter Dilworth, Maxwell Bogue, and Daniel Cowen of WobbleWorks, Inc. (formerly WobbleWorks LLC). The 3Doodler works by extruding heated plastic that cools almost instantly into a solid, stable structure, allowing for the free-hand creation of three-dimensional objects. It utilizes plastic thread made of either acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), or FLEXY, thermoplastic polyurethane (TPU) that is melted and then cooled through a patented process while moving through the pen, which can then be used to make 3D objects by hand. The 3Doodler has been described as a glue gun for 3D printing because of how the plastic is extruded from the tip, with one foot of the plastic thread equaling "about 11 feet of extruded material". There are three pen models, Start, Create and Pro, intended for children, general consumers, and professionals respectively.
Article summary
The 3Doodler is a 3D printing pen developed by Peter Dilworth, Maxwell Bogue, and Daniel Cowen of WobbleWorks, Inc. (formerly WobbleWorks LLC). The 3Doodler works by extruding heated plastic that cools almost instantly into a solid, stable structure, allowing for the free-hand creation of three-dimensional objects. It utilizes plastic thread made of either acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), or FLEXY, thermoplastic polyurethane (TPU) that is melted and then cooled through a patented process while moving through the pen, which can then be used to make 3D objects by hand. The 3Doodler has been described as a glue gun for 3D printing because of how the plastic is extruded from the tip, with one foot of the plastic thread equaling "about 11 feet of extruded material". There are three pen models, Start, Create and Pro, intended for children, general consumers, and professionals respectively.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.