6N1P

The 6N1P ( ) is a Russian-made miniature 9-pin medium gain double triode vacuum tube intended for use as a line audio amplifier and cathode driver.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The 6N1P ( ) is a Russian-made miniature 9-pin medium gain double triode vacuum tube intended for use as a line audio amplifier and cathode driver. Basic data: * Uf = 6.3 V, If = 600 mA * μ = 35 * Ia = 7.5 mA * S = 4.35 mA/V * Pa = 2.2 W The 6N1P has similar ratings to the 6DJ8 and in the past was sometimes rebranded as such, however differences between the two types (the 6N1P requires almost twice the filament current and has only one third the S value) mean they are not directly interchangeable.

The S is about 4.35 mA/V, the 6DJ8/ECC88 has a S of 12.5 ma/V and a gain of 33 and a lower internal resistance. However, the 6N1P is typically more linear for a given load. It is therefore inaccurate to say that these two tubes are identical.

The correct Russian equivalent to the 6DJ8/ECC88 is the 6N23P, the latter has a S of 12.5 mA/V and a gain of 33. The closest western equivalent to the 6N1P is the well known 6BQ7A. A ruggedized/extended ratings version of the tube is designated 6N1P-EV ( ).

It has currently found a use as a driver tube in hi-fi tube amplifiers (such as Audio Research models VS55 and VS110) because of its excellent low distortion and low noise characteristics. The tube is manufactured by the "Voskhod" plant in Kaluga, Russia (see and is distributed in the West under the [[Sovtek] and Svetlana brand names.

The 6N1P ( ) is a Russian-made miniature 9-pin medium gain double triode vacuum tube intended for use as a line audio amplifier and cathode driver. Basic data: Uf = 6.3 V, If = 600 mA μ = 35 Ia = 7.5 mA S = 4.35 mA/V Pa = 2.2 W The 6N1P has similar ratings to the 6DJ8 and in the past was sometimes rebranded as such, however differences between the two types (the 6N1P requires almost twice the filament current and has only one third the S value) mean they are not directly interchangeable.

The S is about 4.35 mA/V, the 6DJ8/ECC88 has a S of 12.5 ma/V and a gain of 33 and a lower internal resistance. However, the 6N1P is typically more linear for a given load. It is therefore inaccurate to say that these two tubes are identical.

The correct Russian equivalent to the 6DJ8/ECC88 is the 6N23P, the latter has a S of 12.5 mA/V and a gain of 33. The closest western equivalent to the 6N1P is the well known 6BQ7A. A ruggedized/extended ratings version of the tube is designated 6N1P-EV ( ).

It has currently found a use as a driver tube in hi-fi tube amplifiers (such as Audio Research models VS55 and VS110) because of its excellent low distortion and low noise characteristics. The tube is manufactured by the "Voskhod" plant in Kaluga, Russia (see ) and is distributed in the West under the Sovtek and Svetlana brand names.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1373699719 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.