6P1P

, USSR (winged "C" logo), 1971 The 6P1P (Russian: 6П1П) is a Soviet-made miniature 9-pin beam tetrode vacuum tube with ratings similar to the 6AQ5, EL90 and the 6V6.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

, USSR (winged "C" logo), 1971 The 6P1P (Russian: 6П1П) is a Soviet-made miniature 9-pin beam tetrode vacuum tube with ratings similar to the 6AQ5, EL90 and the 6V6. Because of a different pinout (a 9-pin base versus 7-pin base) than an 6AQ5/EL90, it cannot be used as a plug-in replacement for these types; however, it will work in the same circuit with component values unchanged.

Its maximum plate/screen voltage and dissipation ratings are actually slightly higher than a 6AQ5. A ruggedized/extended ratings version of the tube is designated 6P1P-EV (Russian: 6П1П-ЕВ), roughly equivalent to the 6AQ5W. A Chinese-manufactured version of the tube also exists, labeled 6P1.

The type was commonly used in Soviet-built vacuum tube radios and TV sets as an output audio amplifier, until it was replaced by the higher-performance 6P14P (close to the EL84). In some old soviet TV sets (mainly before 1960 on 70 degrees deflection picture tubes), it was also used as frame output tube, until more specialized tubes for this purpose were developed in the Soviet union.

The tube is no longer believed to be in production.

, USSR (winged "C" logo), 1971]] The 6P1P (Russian: 6П1П) is a Soviet-made miniature 9-pin beam tetrode vacuum tube with ratings similar to the 6AQ5, EL90 and the 6V6. Because of a different pinout (a 9-pin base versus 7-pin base) than an 6AQ5/EL90, it cannot be used as a plug-in replacement for these types; however, it will work in the same circuit with component values unchanged.

Its maximum plate/screen voltage and dissipation ratings are actually slightly higher than a 6AQ5. A ruggedized/extended ratings version of the tube is designated 6P1P-EV (Russian: 6П1П-ЕВ), roughly equivalent to the 6AQ5W. A Chinese-manufactured version of the tube also exists, labeled 6P1.

The type was commonly used in Soviet-built vacuum tube radios and TV sets as an output audio amplifier, until it was replaced by the higher-performance 6P14P (close to the EL84). In some old soviet TV sets (mainly before 1960 on 70 degrees deflection picture tubes), it was also used as frame output tube, until more specialized tubes for this purpose were developed in the Soviet union.

The tube is no longer believed to be in production.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1195879408 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.