Lesson plan
6V6
basing diagram. 1 - * Unconnected in all versions except for the shell connection of the metal 6V6 2 & 7 - Filament / Heater 3 - Anode / Plate 4 - Grid 2 / Screen Grid 5 - Grid 1 / Control Grid 6 - No connection. Pin normally absent 8 - Cathode & Beam-Forming Plates The 6V6 is a beam-power tetrode vacuum tube. The first of this family of tubes to be introduced was the 6V6G by Ken-Rad Tube & Lamp Corporation in late 1936, with the availability by December of both Ken-Rad and Raytheon 6V6G tubes announced. It is still in use in audio applications, especially electric guitar amplifiers. Following the introduction in July 1936 of the 6L6, the potential of the scaled down version that became the 6V6 was soon realized. The lower-powered 6V6 was better-suited for average home use, and became common in the audio-output-stages of "farmhouse" table-top radios, where power pentodes such as the 6F6 had previously been used. The 6V6 required less heater power and produced less distortion than the 6F6, while yielding higher output in both single-ended and push-pull configurations.…
Article summary
basing diagram. 1 - * Unconnected in all versions except for the shell connection of the metal 6V6 2 & 7 - Filament / Heater 3 - Anode / Plate 4 - Grid 2 / Screen Grid 5 - Grid 1 / Control Grid 6 - No connection. Pin normally absent 8 - Cathode & Beam-Forming Plates The 6V6 is a beam-power tetrode vacuum tube. The first of this family of tubes to be introduced was the 6V6G by Ken-Rad Tube & Lamp Corporation in late 1936, with the availability by December of both Ken-Rad and Raytheon 6V6G tubes announced. It is still in use in audio applications, especially electric guitar amplifiers. Following the introduction in July 1936 of the 6L6, the potential of the scaled down version that became the 6V6 was soon realized. The lower-powered 6V6 was better-suited for average home use, and became common in the audio-output-stages of "farmhouse" table-top radios, where power pentodes such as the 6F6 had previously been used. The 6V6 required less heater power and produced less distortion than the 6F6, while yielding higher output in both single-ended and push-pull configurations.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.