ΜA741

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

and bond wires. The μA741 is an early operational amplifier (op amp) integrated circuit (IC), originally designed at Fairchild Semiconductor by Dave Fullagar and released in 19681. It is still often used as an educational example, especially for imperfections that an operational amplifier can have, and due to its long history of production of compatible and architecturally near-identical ICs under similar names (LM741, UA741, etc.). Being inferior in every aspect compared to modern op amps , applications are restricted to legacy and high-volume use cases where a relatively high-voltage supply is available anyways.

and bond wires. The μA741 is an early operational amplifier (op amp) integrated circuit (IC), originally designed at Fairchild Semiconductor by Dave Fullagar and released in 1968. It is still often used as an educational example, especially for imperfections that an operational amplifier can have, and due to its long history of production of compatible and architecturally near-identical ICs under similar names (LM741, UA741, etc.). Being inferior in every aspect compared to modern op amps , applications are restricted to legacy and high-volume use cases where a relatively high-voltage supply is available anyways.

Applicability

While the 741 was historically used in audio and other sensitive equipment, such use is now rare because of the improved noise performance of more modern op amps. Apart from generating noticeable hiss, 741s and other older op amps may have poor common-mode rejection ratios and so will often introduce cable-borne mains hum and other common-mode interference, such as switch "clicks", into sensitive equipment. The '741' has come to often mean a generic op-amp IC (such as μA741, LM301, 558, LM324, TBA221 — or a more modern replacement such as the TL071).

The description of the 741 output stage is qualitatively similar for many other designs (that may have quite different input stages), except: Some devices (μA748, LM301, LM308) are not internally compensated. Hence, they provide a pin for wiring an external capacitor from output to some point within the operational amplifier, if used in low closed-loop gain applications.

Some modern devices have rail-to-rail output capability, meaning that the output can range from within a few millivolts of the positive supply voltage to within a few millivolts of the negative supply voltage.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1344332266 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “ΜA741” revision 1344332266 · retrieved 2026-10-21 release date (×1) · confidence 0.95 revision URL

Provenance

snapshot enwiki-001344332266 · captured 1773947650.0 · version history

Cite this page as: encyclopegia.org, “ΜA741”, snapshot enwiki-001344332266. https://encyclopegia.org/a/a741