Lesson plan
Abbe error
and a micrometer Abbe error, named after Ernst Abbe, also called sine error, describes the magnification of angular error over distance. For example, when one measures a point that is 1 meter away at 90 degrees, an angular error of 1 degree corresponds to a positional error of over 1.745 cm, equivalent to a distance-measurement error of 1.745%. In machine design, some components are particularly sensitive to angular errors. For example, slight deviations from parallelism of the spindle axis of a lathe to the tool motion along the bed of the machine can lead to relatively large (undesired) taper along the part (i.e. a non-cylindrical part). Vernier calipers are not free from Abbe error, while screw gauges are free from Abbe error. Abbe error is the product of the Abbe offset and the sine of angular error in the system. Abbe error can be detrimental to dead reckoning. Formula: : \epsilon = h \sin \theta \epsilon is the error. h is the distance, sometimes called the Abbe offset. \theta is the angle.
Article summary
and a micrometer Abbe error, named after Ernst Abbe, also called sine error, describes the magnification of angular error over distance. For example, when one measures a point that is 1 meter away at 90 degrees, an angular error of 1 degree corresponds to a positional error of over 1.745 cm, equivalent to a distance-measurement error of 1.745%. In machine design, some components are particularly sensitive to angular errors. For example, slight deviations from parallelism of the spindle axis of a lathe to the tool motion along the bed of the machine can lead to relatively large (undesired) taper along the part (i.e. a non-cylindrical part). Vernier calipers are not free from Abbe error, while screw gauges are free from Abbe error. Abbe error is the product of the Abbe offset and the sine of angular error in the system. Abbe error can be detrimental to dead reckoning. Formula: : \epsilon = h \sin \theta \epsilon is the error. h is the distance, sometimes called the Abbe offset. \theta is the angle.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.