Abbe number
≈ 6 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In optics and lens design, the Abbe number, also known as the Vd-number or constringence of a transparent material, is an approximate measure of a material's dispersion (change in refractive index as a function of wavelength), with high Vd values indicating low dispersion. It is named after Ernst Abbe (1840–1905), the German physicist who defined it. The term Vd-number should not be confused with the normalized frequency in fibers. The Abbe number V_\text{d} of a material is defined as: V_\text{d} \equiv \frac{ n_\text{d} - 1 }{ n_\text{F} - n_\text{C} }, where n_\text{C} , n_\text{d} , and n_\text{F} are the refractive indices of the material at the wavelengths of the Fraunhofer's C, d, and F spectral lines (656.3 nm, 587.56 nm, and 486.1 nm, respectively). This formulation only applies to human vision; outside this range, alternative spectral lines are required. For non-visible spectral lines, the term "V-number" is more commonly used. The more general formulation is V \equiv \frac{ n_\text{center} - 1 }{ n_\text{short} - n_\text{long} }, where n_\text{short} , n_\text{center} , and n_\text{long} are the refractive indices of the material at three different wavelengths. Abbe numbers are used to classify glass and other optical materials in terms of their chromaticity.…
In optics and lens design, the Abbe number, also known as the Vd-number or constringence of a transparent material, is an approximate measure of a material's dispersion (change in refractive index as a function of wavelength), with high Vd values indicating low dispersion. It is named after Ernst Abbe (1840–1905), the German physicist who defined it. The term Vd-number should not be confused with the normalized frequency in fibers. The Abbe number V_\text{d} of a material is defined as: V_\text{d} \equiv \frac{ n_\text{d} - 1 }{ n_\text{F} - n_\text{C} }, where n_\text{C} , n_\text{d} , and n_\text{F} are the refractive indices of the material at the wavelengths of the Fraunhofer's C, d, and F spectral lines (656.3 nm, 587.56 nm, and 486.1 nm, respectively). This formulation only applies to human vision; outside this range, alternative spectral lines are required. For non-visible spectral lines, the term "V-number" is more commonly used. The more general formulation is V \equiv \frac{ n_\text{center} - 1 }{ n_\text{short} - n_\text{long} }, where n_\text{short} , n_\text{center} , and n_\text{long} are the refractive indices of the material at three different wavelengths. Abbe numbers are used to classify glass and other optical materials in terms of their chromaticity. For example, the higher dispersion flint glasses have relatively small Abbe numbers V less than 55, whereas the lower dispersion crown glasses have larger Abbe numbers. Values of V_\text{d} range from below 25 for very dense flint glasses, around 34 for polycarbonate plastics, up to 65 for common crown glasses, and 75 to 85 for some fluorite and phosphate crown glasses. Abbe numbers are useful in the design of achromatic lenses, as their reciprocal is proportional to dispersion (slope of refractive index versus wavelength) in the domain where the human eye is most sensitive (see above figure). For other wavelength regions, or for higher precision in characterizing a system's chromaticity (such as in the design of apochromats), the full dispersion relation is used (i.e., refractive index as a function of wavelength). V_\text{e} = \frac{ n_\text{e} - 1 }{ n_{\text{F}'} - n_{\text{C}'} } . This formulation takes the difference between cadmium's blue ( ) and red ( ) refractive indices at wavelengths 480.0 nm and 643.8 nm, respectively, relative to n_\text{e} for mercury's e-line at 546.073 nm, all of which are in close proximity to—and somewhat easier to produce—than the C, F, and d-lines . Other definitions can be similarly employed; the following table lists standard wavelengths at which n is commonly determined, including the standard subscripts used.
Derivation of relative change
Starting with the Lensmaker's equation, we obtain the thin lens equation by neglecting the small term that accounts for lens thickness d : P_0 = \frac{1}{f} = (n - 1) \Biggl[ \frac{1}{R_1} - \frac{1}{R_2} + \frac{ (n - 1) d }{ n R_1 R_2 } \Biggr] \approx (n - 1) \left( \frac{1}{R_1} - \frac{1}{R_2} \right) , when d \ll \sqrt{ R_1 R_2 } . The change in refractive power P_0 between two wavelengths \lambda_\text{short} and \lambda_\text{long} is given by \Delta P_0 = P_\text{short} - P_\text{long} = ( n_\text{s} - n_\ell ) \left( \frac{1}{R_1} - \frac{1}{R_2} \right) , where n_\text{s} and n_\ell are the short and long wavelengths' refractive indexes, respectively. The difference in power can be expressed relative to the power at a center wavelength \lambda_\text{c} : P_\text{c} = (n_\text{c} - 1) \left( \frac{1}{R_1} - \frac{1}{R_2} \right) , with n_\text{c} having an analogous meaning as above. Now rewrite \Delta P_0 to make P_\text{c} and the Abbe number at the center wavelength V_\text{c} accessible: \Delta P_0 = \left( n_\text{s} - n_\ell \right) \left( \frac{ n_\text{c} - 1 }{ n_\text{c} - 1 } \right) \left( \frac{1}{R_1} - \frac{1}{R_2} \right) = \left( \frac{ n_\text{s} - n_\ell }{ n_\text{c} - 1 } \right) P_\text{c} = \frac{ P_\text{c} }{ V_\text{c} } . The relative change is therefore inversely proportional to V_\text{c} : \frac{\Delta P_0}{ P_\text{c} } = \frac{1}{V_\text{c} } .
See also
Abbe prism Abbe refractometer Calculation of glass properties, including Abbe number Glass code Sellmeier equation, a more comprehensive and physical model of dispersion
References
External links
Abbe graph and data for 356 glasses from Ohara, Hoya, and Schott
Text derived from https://en.wikipedia.org/w/index.php?oldid=1303959530 under CC BY-SA 4.0; modifications have been made.