Lesson plan

Abode318

Abode318 is a residential skyscraper developed by PDG Corporation and Schiavello and designed by Elenberg Fraser and Disegno Australia in Melbourne, Victoria, Australia. , the skyscraper is the 38th–tallest building in Melbourne. Initially proposed in 2007, and named the Barton Tower, the skyscraper anticipated the current trend of "skinny skyscrapers" proposed in Melbourne. Indeed, the most unusual feature of the building is its "curving exterior" which is illuminated by 10 millimetres of rose coloured glass, which incorporates thermal properties that insulate the skyscraper. Abode318 comprises 450 apartments across 57 levels, and reaches a height of . The project received approval by then-Planning Minister Matthew Guy in 2011, with construction commencing later that year. At a cost of AUD$136 million, the building topped-out in late 2014, and was completed by early 2015. At the time of its completion, Abode318 was the 10th–tallest building in Melbourne; additionally, it became the first building since the 2006 completion of the Eureka Tower to be listed in the "ten-tallest buildings of Melbourne".

Back to article

Article summary

Abode318 is a residential skyscraper developed by PDG Corporation and Schiavello and designed by Elenberg Fraser and Disegno Australia in Melbourne, Victoria, Australia. , the skyscraper is the 38th–tallest building in Melbourne. Initially proposed in 2007, and named the Barton Tower, the skyscraper anticipated the current trend of "skinny skyscrapers" proposed in Melbourne. Indeed, the most unusual feature of the building is its "curving exterior" which is illuminated by 10 millimetres of rose coloured glass, which incorporates thermal properties that insulate the skyscraper. Abode318 comprises 450 apartments across 57 levels, and reaches a height of . The project received approval by then-Planning Minister Matthew Guy in 2011, with construction commencing later that year. At a cost of AUD$136 million, the building topped-out in late 2014, and was completed by early 2015. At the time of its completion, Abode318 was the 10th–tallest building in Melbourne; additionally, it became the first building since the 2006 completion of the Eureka Tower to be listed in the "ten-tallest buildings of Melbourne".

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.