ABS Pro

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

ABS Pro is an advanced motorcycle anti-lock braking system (ABS) developed by BMW Motorrad. It extends the capabilities of conventional ABS by maintaining braking stability while the motorcycle is leaned over in a corner. The system continuously adjusts brake pressure based on lean angle and traction data, enhancing control and reducing the likelihood of wheel lock or loss of grip.

ABS Pro is an advanced motorcycle anti-lock braking system (ABS) developed by BMW Motorrad. It extends the capabilities of conventional ABS by maintaining braking stability while the motorcycle is leaned over in a corner. The system continuously adjusts brake pressure based on lean angle and traction data, enhancing control and reducing the likelihood of wheel lock or loss of grip.

Overview

BMW Motorrad introduced ABS Pro in 2014 as part of its continuing investment in electronic rider aids. It first appeared as an upgrade for the BMW HP4 supersport motorcycle and later became available across multiple models in the BMW range. ABS Pro differs from standard ABS by factoring in real-time data from an inertial measurement unit (IMU), which measures lean angle, pitch, and yaw. The system modulates braking pressure individually for each wheel, depending on the bike's position and grip level, allowing for smoother and safer deceleration, even during cornering.

Technology

ABS Pro integrates the following components: Dual wheel-speed sensors to detect slippage A six-axis IMU to measure lean and acceleration An electronic brake-pressure controller linked to the motorcycle's traction and suspension systems Coordination with Dynamic Traction Control (DTC) and Dynamic ESA systems When a rider applies the brake mid-corner, the system automatically reduces the initial pressure gradient to prevent abrupt load transfer and wheel lock. This allows the motorcycle to maintain its line through a bend instead of "standing up" as occurs with traditional ABS systems.

Applications

After debuting on the HP4, ABS Pro became available as standard or optional equipment on several BMW models, including: BMW S1000RR and BMW S1000XR BMW R1200GS and BMW R1250GS BMW K1600GT and BMW K1600GTL BMW R nineT (from 2016 as a retrofit option) Most BMW motorcycles equipped with a six-axis IMU now include ABS Pro as part of their rider-assist packages.

Development

BMW Motorrad pioneered motorcycle ABS in 1988 and has since refined the technology through multiple generations. ABS Pro was developed in collaboration with Bosch and evolved from the company's Motorcycle Stability Control (MSC) platform, adding cornering capability through lean-sensitive modulation.

Reception

The introduction of ABS Pro was widely regarded as a significant advancement in motorcycle safety. Riders and reviewers noted its effectiveness in improving braking stability during cornering and on uneven or slippery surfaces.

See also

Anti-lock braking system Motorcycle safety technology Motorcycle Stability Control Dynamic Traction Control BMW Motorrad

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1335204488 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

6 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.