Lesson plan

Acentric factor

The acentric factor is a conceptual number introduced by Kenneth Pitzer in 1955, proven to be useful in the description of fluids. It has become a standard for the phase characterization of single and pure components, along with other state description parameters such as molecular weight, critical temperature, critical pressure, and critical volume (or critical compressibility). The acentric factor is also said to be a measure of the non-sphericity (centricity) of molecules. Pitzer defined from the relationship : \omega = -\log_{10}(p^\text{sat}_\text{r}) - 1 \text{ at } T_\text{r} = 0.7, where p^\text{sat}_\text{r} = p^\text{sat} / p_c is the reduced saturation vapor pressure, and T_\text{r} = T / T_c is the reduced temperature. Pitzer developed this factor by studying the vapor-pressure curves of various pure substances. Thermodynamically, the vapor-pressure curve for pure components can be mathematically described using the Clausius–Clapeyron equation. The integrated form of equation is mainly used for obtaining vapor-pressure data mathematically. This integrated version shows that the relationship between the logarithm of vapor pressure and the reciprocal of absolute temperature is approximately linear. For a series of fluids, as the acentric factor increases the vapor curve is "pulled" down, resulting in higher boiling points.…

Back to article

Article summary

The acentric factor is a conceptual number introduced by Kenneth Pitzer in 1955, proven to be useful in the description of fluids. It has become a standard for the phase characterization of single and pure components, along with other state description parameters such as molecular weight, critical temperature, critical pressure, and critical volume (or critical compressibility). The acentric factor is also said to be a measure of the non-sphericity (centricity) of molecules. Pitzer defined from the relationship : \omega = -\log_{10}(p^\text{sat}_\text{r}) - 1 \text{ at } T_\text{r} = 0.7, where p^\text{sat}_\text{r} = p^\text{sat} / p_c is the reduced saturation vapor pressure, and T_\text{r} = T / T_c is the reduced temperature. Pitzer developed this factor by studying the vapor-pressure curves of various pure substances. Thermodynamically, the vapor-pressure curve for pure components can be mathematically described using the Clausius–Clapeyron equation. The integrated form of equation is mainly used for obtaining vapor-pressure data mathematically. This integrated version shows that the relationship between the logarithm of vapor pressure and the reciprocal of absolute temperature is approximately linear. For a series of fluids, as the acentric factor increases the vapor curve is "pulled" down, resulting in higher boiling points.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.