Ackermann steering geometry

The Ackermann steering geometry (also called Ackermann's steering trapezium) is a geometric arrangement of linkages in the steering of a car or other vehicle designed to solve the problem of wheels on the inside and outside of a turn…

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Ackermann steering geometry (also called Ackermann's steering trapezium) is a geometric arrangement of linkages in the steering of a car or other vehicle designed to solve the problem of wheels on the inside and outside of a turn needing to trace out circles of different radii. It was invented by the German carriage builder Georg Lankensperger in Munich in 1816, then patented by his agent in England, Rudolph Ackermann (1764–1834) in 1818 for horse-drawn carriages.

Erasmus Darwin may have a prior claim as the inventor dating from 1758. He devised his steering system because he was injured when a carriage tipped over.

Advantages

The first requirement of any steering geometry is to avoid the need for tyres to slip sideways when following the path around a curve. The geometrical solution to this is for all wheels to have their axles arranged as radii of circles with a common centre point.

As the rear wheels are fixed, this centre point must be on a line extended from the rear axle and where the axis of one front wheel meets that line, and the same with the other. A billy cart or four-wheel wagon, whose front axles are fixed to a solid beam with a central pivot, easily meets this condition but requires considerable steering effort because of the fore-and-aft movement of the wheels, and is heavily influenced by road surface variations.

Rather than the preceding "turntable" steering, Ackermann geometry gives each front wheel hub its own pivoted carrier (on solid axles this pivot is called a kingpin but on more complex suspension it may be separate upper and lower pivots), close to its hub. While more complex, this arrangement enhances controllability by reducing the fore-and-aft travel of the steered wheels.

Optimally the kingpin is aligned so that its centre line, extended to the ground, co-incides with the centre of the road wheel where it touches the ground, thus mostly eliminating "bump steer" (where hitting a bump with one wheel causes the steering to move violently - a key problem on fast stagecoaches with turntable steering). The hub carriers have steering arms and the link between these is known as a tie rod or track rod which is moved from side to side to steer the vehicle.

When the wheels are set straight ahead, the whole arrangement of the axle, steering arms and tie rod forms a trapezium(see picture). When the wheels are turned, the inner wheel turns farther than the outer wheel. Ackerman concept used on Yamaha motor-tricycle, Niken Wheel Alignment Explained

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375939886 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001375939886 · captured 2026-09-20 · not yet sealed in the ledger · verify the chain · version history

Cite this page as: encyclopegia.org, “Ackermann steering geometry”, snapshot enwiki-001375939886. https://encyclopegia.org/a/ackermann-steering-geometry

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.