Acoustic location

soldiers operating an acoustic locator in 1940 Acoustic location is a method of determining the position of an object or sound source by using sound waves.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

soldiers operating an acoustic locator in 1940 Acoustic location is a method of determining the position of an object or sound source by using sound waves. Location can take place in gases (such as the atmosphere), liquids (such as water), and in solids (such as in the earth).

Location can be done actively or passively: * Active acoustic location involves the creation of sound in order to produce an echo, which is then analyzed to determine the location of the object in question. * Passive acoustic location involves the detection of sound or vibration created by the object being detected, which is then analyzed to determine the location of the object in question. Both of these techniques, when used in water, are known as sonar; passive sonar and active sonar are both widely used.

Acoustic mirrors and dishes, when using microphones, are a means of passive acoustic localization, but when using speakers are a means of active localization. Typically, more than one device is used, and the location is then triangulated between the several devices.

As a military air defense tool, passive air acoustic location was used from mid-World War I to the early years of World War II to detect enemy aircraft by picking up the noise of their engines. It was rendered obsolete before and during World War II by the introduction of radar, which was far more effective (but interceptable).…

soldiers operating an acoustic locator in 1940]] Acoustic location is a method of determining the position of an object or sound source by using sound waves. Location can take place in gases (such as the atmosphere), liquids (such as water), and in solids (such as in the earth).

Location can be done actively or passively: Active acoustic location involves the creation of sound in order to produce an echo, which is then analyzed to determine the location of the object in question. Passive acoustic location involves the detection of sound or vibration created by the object being detected, which is then analyzed to determine the location of the object in question.

Both of these techniques, when used in water, are known as sonar; passive sonar and active sonar are both widely used. Acoustic mirrors and dishes, when using microphones, are a means of passive acoustic localization, but when using speakers are a means of active localization. Typically, more than one device is used, and the location is then triangulated between the several devices.

As a military air defense tool, passive air acoustic location was used from mid-World War I to the early years of World War II to detect enemy aircraft by picking up the noise of their engines. It was rendered obsolete before and during World War II by the introduction of radar, which was far more effective (but interceptable).

Acoustic techniques had the advantage that they could 'see' around corners and over hills, due to sound diffraction. Civilian uses include locating wildlife and locating the shooting position of a firearm or fireworks.

Summary

Acoustic source localization is the task of locating a sound source given measurements of the sound field. The sound field can be described using physical quantities like sound pressure and particle velocity. By measuring these properties it is (indirectly) possible to obtain a source direction.

Traditionally sound pressure is measured using microphones. Microphones have a polar pattern describing their sensitivity as a function of the direction of the incident sound. Many microphones have an omnidirectional polar pattern which means their sensitivity is independent of the direction of the incident sound.

Microphones with other polar patterns exist that are more sensitive in a certain direction. This however is still no solution for the sound localization problem as one tries to determine either an exact direction, or a point of origin.

Besides considering microphones that measure sound pressure, it is also possible to use a particle velocity probe to measure the acoustic particle velocity directly. The particle velocity is another quantity related to acoustic waves however, unlike sound pressure, particle velocity is a vector. By measuring particle velocity one obtains a source direction directly.

Other more complicated methods using multiple sensors are also possible. Many of these methods use the time difference of arrival (TDOA) technique. Some have termed acoustic source localization an "inverse problem" in that the measured sound field is translated to the position of the sound source.

Methods

Different methods for obtaining either source direction or source location are possible.

Time difference of arrival

The traditional method to obtain the source direction is using the time difference of arrival (TDOA) method. This method can be used with pressure microphones as well as with particle velocity probes.

With a sensor array (for instance a microphone array) consisting of at least two probes it is possible to obtain the source direction using the cross-correlation function between each probes' signal. The cross-correlation function between two microphones is defined as R_{x_1,x_2} (\tau) = \sum_{n=-\infty}^\infty x_1(n) x_2(n+\tau) which defines the level of correlation between the outputs of two sensors x_1 and x_2 .

In general, a higher level of correlation means that the argument \tau is relatively close to the actual time-difference-of-arrival. For two sensors next to each other the TDOA is given by \tau_\text{true} = \frac{d_\text{spacing}}{c} where c is the speed of sound in the medium surrounding the sensors and the source. A well-known example of TDOA is the interaural time difference.

The interaural time difference is the difference in arrival time of a sound between two ears. The interaural time difference is given by \Delta t = \frac{x \cos\theta} c where \Delta t is the time difference in seconds, x is the distance between the two sensors (ears) in meters, \theta is the angle between the baseline of the sensors (ears) and the incident sound, in degrees.

Triangulation

In trigonometry and geometry, triangulation is the process of determining the location of a point by measuring angles to it from known points at either end of a fixed baseline, rather than measuring distances to the point directly (trilateration). The point can then be fixed as the third point of a triangle with one known side and two known angles.

For acoustic localization this means that if the source direction is measured at two or more locations in space, it is possible to triangulate its location.

Indirect methods

Steered response power (SRP) methods are a class of indirect acoustic source localization methods. Instead of estimating a set of time-differences of arrival (TDOAs) between pairs of microphones and combining the acquired estimates to find the source location, indirect methods search for a candidate source location over a grid of spatial points.

In this context, methods such as the steered-response power with phase transform (SRP-PHAT) are usually interpreted as finding the candidate location that maximizes the output of a delay-and-sum beamformer. The method has been shown to be very robust to noise and reverberation, motivating the development of modified approaches aimed at increasing its performance in real-time acoustic processing applications.

"Huge Ear Locates Planes and Tells Their Speed" Popular Mechanics, December 1930 article on French aircraft sound detector with photo. Many references can be found in Beamforming References An Empirical Study of Collaborative Acoustic Source Localization

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378938286 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

14 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.