Acoustoelastic effect
The acoustoelastic effect is how the sound velocities (both longitudinal and shear wave velocities) of an elastic material change if subjected to an initial static stress field.
≈ 18 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The acoustoelastic effect is how the sound velocities (both longitudinal and shear wave velocities) of an elastic material change if subjected to an initial static stress field. This is a non-linear effect of the constitutive relation between mechanical stress and finite strain in a material of continuous mass.
In classical linear elasticity theory small deformations of most elastic materials can be described by a linear relation between the applied stress and the resulting strain. This relationship is commonly known as the generalised Hooke's law.
The linear elastic theory involves second order elastic constants (e.g. \lambda and \mu ) and yields constant longitudinal and shear sound velocities in an elastic material, not affected by an applied stress. The acoustoelastic effect on the other hand include higher order expansion of the constitutive relation (non-linear elasticity theory ) between the applied stress and resulting strain, which yields longitudinal and shear sound velocities dependent of the stress state of the material.
In the limit of an unstressed material the sound velocities of the linear elastic theory are reproduced. The acoustoelastic effect was investigated as early as 1925 by Brillouin. He found that the propagation velocity of acoustic waves would decrease proportional to an applied hydrostatic pressure.…
The acoustoelastic effect is how the sound velocities (both longitudinal and shear wave velocities) of an elastic material change if subjected to an initial static stress field. This is a non-linear effect of the constitutive relation between mechanical stress and finite strain in a material of continuous mass.
In classical linear elasticity theory small deformations of most elastic materials can be described by a linear relation between the applied stress and the resulting strain. This relationship is commonly known as the generalised Hooke's law.
The linear elastic theory involves second order elastic constants (e.g. \lambda and \mu ) and yields constant longitudinal and shear sound velocities in an elastic material, not affected by an applied stress. The acoustoelastic effect on the other hand include higher order expansion of the constitutive relation (non-linear elasticity theory ) between the applied stress and resulting strain, which yields longitudinal and shear sound velocities dependent of the stress state of the material.
In the limit of an unstressed material the sound velocities of the linear elastic theory are reproduced. The acoustoelastic effect was investigated as early as 1925 by Brillouin. He found that the propagation velocity of acoustic waves would decrease proportional to an applied hydrostatic pressure.
However, a consequence of his theory was that sound waves would stop propagating at a sufficiently large pressure. This paradoxical effect was later shown to be caused by the incorrect assumptions that the elastic parameters were not affected by the pressure.
In 1937 Francis Dominic Murnaghan presented a mathematical theory extending the linear elastic theory to also include finite deformation in elastic isotropic materials. This theory included three third-order elastic constants l , m , and n . In 1953 Huges and Kelly used the theory of Murnaghan in their experimental work to establish numerical values for higher order elastic constants for several elastic materials including Polystyrene, Armco iron, and Pyrex, subjected to hydrostatic pressure and uniaxial compression.
The constitutive relation between the stress and strain can be expressed in different forms based on the chosen stress and strain forms. Selecting the 1st Piola-Kirchhoff stress tensor \boldsymbol{P} (which is the transpose of the nominal stress tensor \boldsymbol{P}^T=\boldsymbol{N} ), the constitutive equation for a compressible hyper elastic material can be expressed in terms of the Lagrangian Green strain ( \boldsymbol{E} ) as: \boldsymbol{P} = \boldsymbol{F}\cdot\frac{\partial W}{\partial \boldsymbol{E}} \qquad \text{or} \qquad P_{ij} = F_{ik}~\frac{\partial W}{\partial E_{kj}}, \qquad i,j=1,2,3 ~, where \boldsymbol{F} is the deformation gradient tensor, and where the second expression uses the Einstein summation convention for index notation of tensors.
W is the strain energy density function for a hyperelastic material and have been defined per unit volume rather than per unit mass since this avoids the need of multiplying the right hand side with the mass density \rho_0 of the reference configuration. Assuming that the scalar strain energy density function W(\boldsymbol{E}) can be approximated by a Taylor series expansion in the current strain \boldsymbol{E} , it can be expressed (in index notation) as: W \approx C_0 + C_{ij}E_{ij} + \frac{1}{2!}C_{ijkl}E_{ij}E_{kl} + \frac{1}{3!}C_{ijklmn}E_{ij}E_{kl}E_{mn}+\cdots Imposing the restrictions that the strain energy function should be zero and have a minimum when the material is in the un-deformed state (i.e. W(E_{ij}=0)=0 ) it is clear that there are no constant or linear term in the strain energy function, and thus: W \approx \frac{1}{2!}C_{ijkl}E_{ij}E_{kl} + \frac{1}{3!}C_{ijklmn}E_{ij}E_{kl}E_{mn}+\cdots, where C_{ijkl} is a fourth-order tensor of second-order elastic moduli, while C_{ijklmn} is a sixth-order tensor of third-order elastic moduli.
The symmetry of E_{ij}=E_{ji} together with the scalar strain energy density function W implies that the second order moduli C_{ijkl} have the following symmetry: C_{ijkl}=C_{jikl}=C_{ijlk}, which reduce the number of independent elastic constants from 81 to 36. In addition the power expansion implies that the second order moduli also have the major symmetry C_{ijkl}=C_{klij}, which further reduce the number of independent elastic constants to 21.
The same arguments can be used for the third order elastic moduli C_{ijklmn} . These symmetries also allows the elastic moduli to be expressed by the Voigt notation (i.e. C_{ijkl}=C_{IJ} and C_{ijklmn}=C_{IJK} ).
The deformation gradient tensor can be expressed in component form as F_{ij}=\frac{\partial u_i}{\partial X_j} + \delta_{ij}, where u_i is the displacement of a material point P from coordinate X_i in the reference configuration to coordinate x_i in the deformed configuration (see Figure 2 in the finite strain theory page). Including the power expansion of strain energy function in the constitutive relation and replacing the Lagrangian strain tensor E_{kl} with the expansion given on the finite strain tensor page yields (note that lower case u have been used in this section compared to the upper case on the finite strain page) the constitutive equation P_{ij} = C_{ijkl}\frac{\partial u_k}{\partial X_l} + \frac{1}{2}M_{ijklmn}\frac{\partial u_k}{\partial X_l}\frac{\partial u_m}{\partial X_n} + \frac{1}{3}M_{ijklmnpq}\frac{\partial u_k}{\partial X_l}\frac{\partial u_m}{\partial X_n}\frac{\partial u_p}{\partial X_q}+\cdots, where M_{ijklmn} = C_{ijklmn} + C_{ijln}\delta_{km} + C_{jnkl}\delta_{im} + C_{jlmn}\delta_{ik}, and higher order terms have been neglected (see for detailed derivations).
For referenceM by neglecting higher order terms in \partial u_k / \partial X_l this expression reduce to P_{ij} = C_{ijkl}\frac{\partial u_k}{\partial X_l}, which is a version of the generalised Hooke's law where P_{ij} is a measure of stress while \partial u_k / \partial X_l is a measure of strain, and C_{ijkl} is the linear relation between them. \boldsymbol{u}=\boldsymbol{u}^{(0)} + \boldsymbol{u}^{(1)}=\boldsymbol{x'}-\boldsymbol{X}, where \boldsymbol{u}^{(0)} = \boldsymbol{x} - \boldsymbol{X}, \qquad \boldsymbol{u}^{(1)}=\boldsymbol{x'} - \boldsymbol{x} describes the static (Lagrangian) initial displacement due to the applied pre-stress, and the (Eulerian) displacement due to the acoustic disturbance, respectively. Cauchy's first law of motion (or balance of linear momentum) for the additional Eulerian disturbance \boldsymbol{u}^{(1)} can then be derived in terms of the intermediate Lagrangian deformation \boldsymbol{u}^{(0)} assuming that the small-on-large assumption |\boldsymbol{u}^{(1)}| \ll |\boldsymbol{u}^{(0)}| holds.
Using the Lagrangian form of Cauchy's first law of motion, where the effect of a constant body force (i.e. gravity) has been neglected, yields \operatorname{Div} \boldsymbol{P} = \rho_0\ddot{\boldsymbol{x}'}. Note that the subscript/superscript "0" is used in this text to denote the un-stressed reference state, and a dotted variable is as usual the time ( t ) derivative of the variable, and \operatorname{Div} is the divergence operator with respect to the Lagrangian coordinate system \boldsymbol{X} .
The right hand side (the time dependent part) of the law of motion can be expressed as \begin{align} \rho_0 \ddot{\boldsymbol{x}'} &= \rho_0 \frac{\partial^2}{\partial t^2} (\boldsymbol{u}^{(0)} + \boldsymbol{u}^{(1)} + \boldsymbol{X}) \\ &= \rho_0 \frac{\partial^2 \boldsymbol{u}^{(1)}}{\partial t^2} \end{align} under the assumption that both the unstressed state and the initial deformation state are static and thus \partial^2 \boldsymbol{u}^{(0)} / \partial t^2 = \partial^2 \boldsymbol{X} / \partial t^2 = 0 . For the left hand side (the space dependent part) the spatial Lagrangian partial derivatives with respect to X_j can be expanded in the Eulerian x_j by using the chain rule and changing the variables through the relation between the displacement vectors as \frac{\partial}{\partial X_j} = \frac{\partial}{\partial x_j} + u^{(0)}_{k,j} \frac{\partial}{\partial x_k} + \cdots where the short form u^{(0)}_{k,j} \equiv \partial u^{(0)}_k / \partial x_j has been used.
Thus \frac{\partial P_{ij}}{\partial X_j} \approx \frac{\partial P_{ij}}{\partial x_j} + u_{p.j}^{(0)} \frac{\partial P_{ij}}{\partial x_p} Assuming further that the static initial deformation \boldsymbol{u}^{(0)} (the pre-stressed state) is in equilibrium means that \operatorname{Div}\boldsymbol{P}^{(0)} = \boldsymbol{0} , and the law of motion can in combination with the constitutive equation given above be reduced to a linear relation (i.e. where higher order terms in u_{m,n}^{(0)} ) between the static initial deformation \boldsymbol{u}^{(0)} and the additional dynamic disturbance \boldsymbol{u}^{(1)}(\boldsymbol{x}, t) as (see for detailed derivations) B_{ijkl}\frac{\partial^2 u_k^{(1)}}{\partial x_j \partial x_l} = \rho_0 \frac{\partial^2 u_i^{(1)}}{\partial t^2}, where B_{ijkl} = C_{ijkl} + \delta_{ik} C_{jlqr} u_{q,r}^{(0)} + C_{rjkl} u_{i,r}^{(0)} + C_{irkl} u_{j,r}^{(0)} + C_{ijrl} u_{k,r}^{(0)} + C_{ijkr} u_{l,r}^{(0)} + C_{ijklmn} u_{m,n}^{(0)}. This expression is recognised as the linear wave equation.
Considering a plane wave of the form \boldsymbol{u}^{(1)}(\boldsymbol{x}, t) = \boldsymbol{m}\, f(\boldsymbol{N}\cdot\boldsymbol{x} - ct), where \boldsymbol{N} is a Lagrangian unit vector in the direction of propagation (i.e., parallel to the wave number \boldsymbol{k} = k \boldsymbol{N} normal to the wave front), \boldsymbol{m} is a unit vector referred to as the polarization vector (describing the direction of particle motion), c is the phase wave speed, and f is a twice continuously differentiable function (e.g. a sinusoidal function). Inserting this plane wave in to the linear wave equation derived above yields \boldsymbol{Q}(\boldsymbol{N})\boldsymbol{m} = \rho_0 c^2 \boldsymbol{m} where \boldsymbol{Q}(\boldsymbol{N}) is introduced as the acoustic tensor, and depends on \boldsymbol{N} as [\boldsymbol{Q}(\boldsymbol{N})]_{ik} = B_{ijkl} N_j N_l. This expression is called the propagation condition and determines for a given propagation direction \boldsymbol{n} the velocity and polarization of possible waves corresponding to plane waves.
The wave velocities can be determined by the characteristic equation \det(\boldsymbol{Q}(\boldsymbol{N}) - \rho_0 c^2 \boldsymbol{I}) = 0, where \det is the determinant and \boldsymbol{I} is the identity matrix. For a hyperelastic material \boldsymbol{Q}(\boldsymbol{N}) is symmetric (but not in general), and the eigenvalues ( \rho_0 c^2 ) are thus real.
For the wave velocities to also be real the eigenvalues need to be positive. If this is the case, three mutually orthogonal real plane waves exist for the given propagation direction \boldsymbol{N} .
From the two expressions of the acoustic tensor it is clear that \rho_0 c^2 = \boldsymbol{Q}(\boldsymbol{N}) \boldsymbol{m} \cdot \boldsymbol{m} = B_{ijkl} N_j N_l m_i m_k, and the inequality B_{ijkl} N_j N_l m_i m_k > 0 (also called the strong ellipticity condition) for all non-zero vectors \boldsymbol{N} and \boldsymbol{m} guarantee that the velocity of homogeneous plane waves are real. The polarization \boldsymbol{m} = \boldsymbol{N} corresponds to a longitudinal wave where the particle motion is parallel to the propagation direction (also referred to as a compressional wave).
The two polarizations where \boldsymbol{m} \cdot \boldsymbol{N} = 0 corresponds to transverse waves where the particle motion is orthogonal to the propagation direction (also referred to as shear waves). For a second order isotropic tensor (i.e. a tensor having the same components in any coordinate system) like the Lagrangian strain tensor \boldsymbol{E} have the invariants \operatorname{tr}\boldsymbol{E}^q where \operatorname{tr} is the trace operator, and q\in\left\{1,2,3,\dots\right\} .
The strain energy function of an isotropic material can thus be expressed by W(\boldsymbol{E})=W(\operatorname{tr}\boldsymbol{E}^q),\, k\in \left\{1,2,3,\ldots\right\} , or a superposition there of, which can be rewritten as W = \frac{\lambda}{2}(\operatorname{tr}\boldsymbol{E})^2 + \mu \operatorname{tr}\boldsymbol{E}^2 + \frac{C}{3} (\operatorname{tr}\boldsymbol{E})^3 + B(\operatorname{tr}\boldsymbol{E})\operatorname{tr}\boldsymbol{E}^2 + \frac{A}{3} \operatorname{tr}\boldsymbol{E}^3+\cdots, where \lambda, \mu, A, B, C are constants. The constants \lambda and \mu are the second order elastic moduli better known as the Lamé parameters, while A, B, and C are the third order elastic moduli introduced by, which are alternative but equivalent to l, m, and n introduced by Murnaghan.
Combining this with the general expression for the strain energy function it is clear that \begin{align} C_{ijkl} &= \lambda \delta_{ij}\delta_{kl} + 2\mu \delta I_{ijkl}, \\ C_{ijklmn} &= 2C \delta_{ij}\delta_{kl}\delta_{mn} + 2B(\delta_{ij}I_{klmn} + \delta_{kl}I_{mnij} + \delta_{mn}I_{ijkl}) +\frac{1}{2}A(\delta_{ik}I_{jlmn} + \delta_{il}I_{jkmn} + \delta_{jk}I_{ilmn} + \delta_{jl}I_{ikmn}), \end{align}\!\, where I_{ijkl} = \frac{1}{2}(\delta_{ik}\delta_{jl} + \delta_{il}\delta_{jk}) . Historically different selection of these third order elastic constants have been used, and some of the variations is shown in Table 1.
A cuboidal sample of a compressible solid in an unstressed reference configuration can be expressed by the Cartesian coordinates X_i \in [0,L_i],\, i=1,2,3 , where the geometry is aligned with the Lagrangian coordinate system, and L_i is the length of the sides of the cuboid in the reference configuration. Subjecting the cuboid to a uniaxial tension in the x_1 -direction so that it deforms with a pure homogeneous strain such that the coordinates of the material points in the deformed configuration can be expressed by x_1=\lambda_1 X_1,x_2=\lambda_2 X_2,x_3=\lambda_3 X_3 , which gives the elongations e_i \equiv l_i/L_i - 1 = \lambda_i - 1 in the x_i -direction.
Here l_i signifies the current (deformed) length of the cuboid side i and where the ratio between the length of the sides in the current and reference configuration are denoted by \lambda_i \equiv l_i / L_i called the principal stretches. For an isotropic material this corresponds to a deformation without any rotation (See polar decomposition of the deformation gradient tensor where \boldsymbol{F}=\boldsymbol{RU}=\boldsymbol{VR} and the rotation \boldsymbol{R}=\boldsymbol{I} ).
This can be described through spectral representation by the principal stretches \lambda_i as eigenvalues, or equivalently by the elongations e_i . For a uniaxial tension in the x_1 -direction ( P_{11}>0 we assume that the e_1 increase by some amount. If the lateral faces are free of traction (i.e., P_{22} = P_{33} = 0 ) the lateral elongations e_2 and e_3 are limited to the range e_2,e_3 \in (-1,0] .
For isotropic symmetry the lateral elongations (or contractions) must also be equal (i.e. e_2=e_3 ). The range corresponds to the range from total lateral contraction ( e_2 = e_3 = -1 , which is non-physical), and to no change in the lateral dimensions ( e_2 = e_3 = 0 ).
It is noted that theoretically the range could be expanded to values large than 0 corresponding to an increase in lateral dimensions as a result of increase in axial dimension. However, very few materials (called auxetic materials) exhibit this property.
If the strong ellipticity condition ( B_{ijkl} N_j N_l m_i m_k > 0 ) holds, three orthogonally polarization directions ( \boldsymbol{m} will give a non-zero and real sound velocity for a given propagation direction \boldsymbol{N} . The following will derive the sound velocities for óne selection of applied uniaxial tension, propagation direction, and an orthonormal set of polarization vectors.
For a uniaxial tension applied in the x_1 -direction, and deriving the sound velocities for waves propagating orthogonally to the applied tension (e.g. in the x_3 -direction with propagation vector \boldsymbol{N}=[0,0,1] ), one selection of orthonormal polarizations may be \{\boldsymbol{m}\} = \begin{cases} \mathbf{m}_1 = \mathbf{\hat{x}}_1 = [1,0,0] & \| \, \text{to applied tension}\\ \mathbf{m}_2 = \mathbf{\hat{x}}_2 = [0,1,0] & \perp \text{to applied tension}\\ \mathbf{m}_3 = \mathbf{\hat{x}}_3 = [0,0,1] & \| \, \textrm{to} \, \mathbf{N} \end{cases} which gives the three sound velocities \rho_0 c^2_{33} = B_{3333}, \qquad \rho_0 c^2_{31} = B_{1313}, \qquad \rho_0 c^2_{32} = B_{2323}, where the first index i of the sound velocities c_{ij} indicate the propagation direction (here the x_3 -direction, while the second index j indicate the selected polarization direction ( j=i corresponds to particle motion in the propagation direction i – i.e. longitudinal wave, and j\neq i corresponds to particle motion perpendicular to the propagation direction – i.e. shear wave). Expanding the relevant coefficients of the acoustic tensor, and substituting the second- and third-order elastic moduli C_{ijkl} and C_{ijklmn} with their isotropic equivalents, \lambda,\mu and A,B,C respectively, leads to the sound velocities expressed as \rho_0 c^2_{33} = \lambda + 2\mu + a_{33}e_1, \qquad \rho_0 c^2_{3k} = \mu + a_{3k}e_1, \quad k=1,2 where a_{33} = - \frac{2\lambda(\lambda + 2\mu) + \lambda A + 2(\lambda - \mu)B - 2\mu C}{\lambda + \mu} a_{31} = \frac{(\lambda + 2\mu)(4\mu + A) + 4\mu B}{4(\lambda + \mu)} a_{32} = - \frac{\lambda(4\mu + A) - 2\mu B}{2(\lambda + \mu)} are the acoustoelastic coefficients related to effects from third order elastic constants.
To be able to measure the sound velocity, and more specifically the change in sound velocity, in a material subjected to some stress state, one can measure the velocity of an acoustic signal propagating through the material in question. There are several methods to do this but all of them use one of two physical relations of the sound velocity.
The first relation is related to the time it takes a signal to propagate from one point to another (typically the distance between two acoustic transducers or two times the distance from one transducer to a reflective surface). This is often referred to as "Time-of-flight" (TOF) measurements, and use the relation c = \frac{d}{t} where d is the distance the signal travels and t is the time it takes to travel this distance.
The second relation is related to the inverse of the time, the frequency, of the signal. The relation here is c = f \lambda where f is the frequency of the signal and \lambda is the wave length. The measurements using the frequency as measurand use the phenomenon of acoustic resonance where n number of wave lengths match the length over which the signal resonate.
Both these methods are dependent on the distance over which it measure, either directly as in the Time-of-flight, or indirectly through the matching number of wavelengths over the physical extent of the specimen which resonate.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1311878036 under CC BY-SA 4.0; modifications have been made.