Activating function

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The activating function is a mathematical formalism that is used to approximate the influence of an extracellular field on an axon or neurons. It was developed by Frank Rattay and is a useful tool to approximate the influence of functional electrical stimulation (FES) or neuromodulation techniques on target neurons. It points out locations of high hyperpolarization and depolarization caused by the electrical field acting upon the nerve fiber. As a rule of thumb, the activating function is proportional to the second-order spatial derivative of the extracellular potential along the axon.

The activating function is a mathematical formalism that is used to approximate the influence of an extracellular field on an axon or neurons. It was developed by Frank Rattay and is a useful tool to approximate the influence of functional electrical stimulation (FES) or neuromodulation techniques on target neurons. It points out locations of high hyperpolarization and depolarization caused by the electrical field acting upon the nerve fiber. As a rule of thumb, the activating function is proportional to the second-order spatial derivative of the extracellular potential along the axon. f_n=1/c\left( \frac{V^e_{n-1}-V^e_{n}}{R_{n-1}/2+R_{n}/2} + \frac{V^e_{n+1}-V^e_{n}}{R_{n+1}/2+R_{n}/2} + ... \right) , where c is the membrane capacity, V^e_n the extracellular voltage outside compartment n relative to the ground and R_n the axonal resistance of compartment n . The activating function represents the rate of membrane potential change if the neuron is in resting state before the stimulation. Its physical dimensions are V/s or mV/ms. In other words, it represents the slope of the membrane voltage at the beginning of the stimulation. Following McNeal's simplifications for long fibers of an ideal internode membrane, with both membrane capacity and conductance assumed to be 0 the differential equation determining the membrane potential V^m for each node is: \frac{dV^m_n}{dt}=\left[-i_{ion,n} + \frac{d\Delta x}{4\rho_i L} \cdot \left( \frac{V^m_{n-1}-2V^m_n+V^m_{n+1}}{\Delta x^2}+ \frac{V^e_{n-1}-2V^e_{n}+V^e_{n+1}}{\Delta x^2} \right) \right] / c , where d is the constant fiber diameter, \Delta x the node-to-node distance, L the node length \rho_i the axomplasmatic resistivity, c the capacity and i_{ion} the ionic currents. From this the activating function follows as: f_n=\frac{d\Delta x}{4\rho_i Lc} \frac{V^e_{n-1}-2V^e_{n}+V^e_{n+1}}{\Delta x^2} . In this case the activating function is proportional to the second order spatial difference of the extracellular potential along the fibers. If L = \Delta x and \Delta x \to 0 then: f=\frac{d}{4\rho_ic}\cdot\frac{\delta^2V^e}{\delta x^2} . Thus f is proportional to the second order spatial differential along the fiber.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1322948246 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.