activity coefficient
≈ 10 min read
Names in other languages
- Españolcoeficiente de actividad
- Portuguêscoeficiente de atividade
- PolskiWspółczynnik aktywności
- cacoeficient d'activitat
- Svenskaaktivitetskoefficient
- Englishactivity coefficient
- العربيةمعامل فاعلية
- 中文活度系数
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In thermodynamics, an activity coefficient is a factor used to account for deviation of a mixture of chemical substances from ideal behaviour. In an ideal mixture, the microscopic interactions between each pair of chemical species are the same (or macroscopically equivalent, the enthalpy change of solution and volume variation in mixing is zero) and, as a result, properties of the mixtures can be expressed directly in terms of simple concentrations or partial pressures of the substances present e.g. Raoult's law. Deviations from ideality are accommodated by modifying the concentration by an activity coefficient. Analogously, expressions involving gases can be adjusted for non-ideality by scaling partial pressures by a fugacity coefficient. The concept of activity coefficient is closely linked to that of activity in chemistry.
In thermodynamics, an activity coefficient is a factor used to account for deviation of a mixture of chemical substances from ideal behaviour. In an ideal mixture, the microscopic interactions between each pair of chemical species are the same (or macroscopically equivalent, the enthalpy change of solution and volume variation in mixing is zero) and, as a result, properties of the mixtures can be expressed directly in terms of simple concentrations or partial pressures of the substances present e.g. Raoult's law. Deviations from ideality are accommodated by modifying the concentration by an activity coefficient. Analogously, expressions involving gases can be adjusted for non-ideality by scaling partial pressures by a fugacity coefficient. The concept of activity coefficient is closely linked to that of activity in chemistry. \mu_\mathrm{B} = \mu_\mathrm{B}^{\ominus} + RT \ln x_\mathrm{B} \, , where μ is the chemical potential of a pure substance \mathrm{B} , and x_\mathrm{B} is the mole fraction of the substance in the mixture. This is generalised to include non-ideal behavior by writing \mu_\mathrm{B} = \mu_\mathrm{B}^{\ominus} + RT \ln a_\mathrm{B} \, when a_\mathrm{B} is the activity of the substance in the mixture, a_\mathrm{B} = x_\mathrm{B} \gamma_\mathrm{B} , where \gamma_\mathrm{B} is the activity coefficient, which may itself depend on x_\mathrm{B} . As \gamma_\mathrm{B} approaches 1, the substance behaves as if it were ideal. For instance, if \gamma_\mathrm{B} ≈ 1, then Raoult's law is accurate. For \gamma_\mathrm{B} > 1 and \gamma_\mathrm{B} x_\mathrm{B} goes to zero, the activity coefficient of substance B approaches a constant; this relationship is Henry's law for the solvent. These relationships are related to each other through the Gibbs–Duhem equation. Note that in general activity coefficients are dimensionless. In detail: Raoult's law states that the partial pressure of component B is related to its vapor pressure (saturation pressure) and its mole fraction x_\mathrm{B} in the liquid phase, p_\mathrm{B} = x_\mathrm{B} \gamma_\mathrm{B} p^{\sigma}_\mathrm{B} \;, with the convention \lim_{x_\mathrm{B} \to 1} \gamma_\mathrm{B} = 1 \;. In other words: Pure liquids represent the ideal case. At infinite dilution, the activity coefficient approaches its limiting value, \gamma_\mathrm{B} ∞ . Comparison with Henry's law, p_\mathrm{B} = K_{\mathrm{H,B}} x_\mathrm{B} \quad \text{for} \quad x_\mathrm{B} \to 0 \;, immediately gives K_{\mathrm{H,B}} = p_\mathrm{B}^\sigma \gamma_\mathrm{B}^\infty \;. In other words: The compound shows nonideal behavior in the dilute case. The above definition of the activity coefficient is impractical if the compound does not exist as a pure liquid. This is often the case for electrolytes or biochemical compounds. In such cases, a different definition is used that considers infinite dilution as the ideal state: \gamma_\mathrm{B}^\dagger \equiv \gamma_\mathrm{B} / \gamma_\mathrm{B}^\infty with \lim_{x_\mathrm{B} \to 0} \gamma_\mathrm{B}^\dagger = 1 \;, and \mu_\mathrm{B} = \underbrace{\mu_\mathrm{B}^\ominus + RT \ln \gamma_\mathrm{B}^\infty}_{\mu_\mathrm{B}^{\ominus\dagger}} + RT \ln \left(x_\mathrm{B} \gamma_\mathrm{B}^\dagger\right) The ^\dagger symbol has been used here to distinguish between the two kinds of activity coefficients. Usually it is omitted, as it is clear from the context which kind is meant. But there are cases where both kinds of activity coefficients are needed and may even appear in the same equation, e.g., for solutions of salts in (water + alcohol) mixtures. This is sometimes a source of errors. Modifying mole fractions or concentrations by activity coefficients gives the effective activities of the components, and hence allows expressions such as Raoult's law and equilibrium constants to be applied to both ideal and non-ideal mixtures. \gamma_\pm=\sqrt{\gamma_+\gamma_-} where \gamma_\mathrm{+} and \gamma_\mathrm{-} are the activity coefficients of the cation and anion respectively. More generally, the mean activity coefficient of a compound of formula A_\mathrm{p} B_\mathrm{q} is given by \gamma_\pm=\sqrt[p+q]{\gamma_\mathrm{A}^p\gamma_\mathrm{B}^q}. The prevailing view that single ion activity coefficients are unmeasurable independently, or perhaps even physically meaningless, has its roots in the work of Guggenheim in the late 1920s. In this view, the partitioning of the physical electrochemical potentials into an activity contribution and a Galvani potential contribution is arbitrary, thus nonidealities in ion activities can be remapped to nonidealities in Galvani potential and vice versa. Nevertheless, certain products of activities (such as \gamma_\pm ) reflect a charge-neutral stoichiometry that is insensitive to this partitioning, so these products are physically meaningful even if the single-ion activities are not. However, chemists have never given up the idea of single ion activities, and by implication single ion activity coefficients. For example, pH is defined as the negative logarithm of the hydrogen ion activity. If the prevailing view on the physical meaning and measurability of single ion activities is correct then defining pH as the negative logarithm of the hydrogen ion activity places the quantity squarely in the unmeasurable category. Recognizing this logical difficulty, International Union of Pure and Applied Chemistry (IUPAC) states that the activity-based definition of pH is a notional definition only. Despite the prevailing negative view on the measurability of single ion coefficients, the concept of single ion activities continues to be discussed in the literature. \log_{10}(\gamma_{0}) = b I This simple model predicts activities of many species (dissolved undissociated gases such as CO 2 , H 2 S, NH 3 , undissociated acids and bases) to high ionic strengths (up to 5 mol/kg). The value of the constant b for CO 2 is 0.11 at 10 °C and 0.20 at 330 °C. For water as solvent, the activity a w can be calculated using: \ln(a_\mathrm{w}) = \frac{-\nu b}{55.51} \varphi where ν is the number of ions produced from the dissociation of one molecule of the dissolved salt, b is the molality of the salt dissolved in water, φ is the osmotic coefficient of water, and the constant 55.51 represents the molality of water. In the above equation, the activity of a solvent (here water) is represented as inversely proportional to the number of particles of salt versus that of the solvent.
Link to ionic diameter
The ionic activity coefficient is connected to the ionic diameter by the formula obtained from Debye–Hückel theory of electrolytes: \log (\gamma_{i}) = - \frac {A z_i^2 \sqrt {I}}{1+ B a \sqrt {I}} where A and B are constants, z i is the valence number of the ion, and I is ionic strength. \ln \gamma_s = \frac{h- \nu}{\nu} \ln \left (1 + \frac{br}{55.5} \right) - \frac{h}{\nu} \ln \left (1 - \frac{br}{55.5} \right) + \frac{br(r + h -\nu)}{55.5 \left (1 + \frac{br}{55.5} \right)} The Stokes–Robinson model has been analyzed and improved by other investigators. The problem with this widely accepted idea that electrolyte activity coefficients are driven at higher concentrations by changes in hydration is that water activities are completely dependent on the concentration of the ions themselves, as imposed by a thermodynamic relationship called the Gibbs-Duhem equation. This means that the activity coefficients and the corresponding water activities are linked together fundamentally, regardless of molecular-level hypotheses. Due to this high correlation, such hypotheses are not independent enough to be satisfactorily tested.
Dependence on state parameters
The derivative of an activity coefficient with respect to temperature is related to excess molar enthalpy by \bar{H}^{\mathsf{E}}_i= -RT^2 \frac{\partial}{\partial T}\ln(\gamma_i) Similarly, the derivative of an activity coefficient with respect to pressure can be related to excess molar volume. \bar{V}^{\mathsf{E}}_i= RT \frac{\partial}{\partial P}\ln(\gamma_i) \alpha_\mathrm{A} + \beta_\mathrm{B} = \sigma_\mathrm{S} + \tau_\mathrm{T}, \Delta_\mathrm{r} G = \sigma \mu_\mathrm{S} + \tau \mu_\mathrm{T} - (\alpha \mu_\mathrm{A} + \beta \mu_\mathrm{B}) = 0\, Substitute in the expressions for the chemical potential of each reactant: \Delta_\mathrm{r} G = \sigma \mu_S^\ominus + \sigma RT \ln a_\mathrm{S} + \tau \mu_\mathrm{T}^\ominus + \tau RT \ln a_\mathrm{T} -(\alpha \mu_\mathrm{A}^\ominus + \alpha RT \ln a_\mathrm{A} + \beta \mu_\mathrm{B}^\ominus + \beta RT \ln a_\mathrm{B})=0 Upon rearrangement this expression becomes \Delta_\mathrm{r} G =\left(\sigma \mu_\mathrm{S}^\ominus+\tau \mu_\mathrm{T}^\ominus -\alpha \mu_\mathrm{A}^\ominus- \beta \mu_\mathrm{B}^\ominus \right) + RT \ln \frac{a_\mathrm{S}^\sigma a_\mathrm{T}^\tau} {a_\mathrm{A}^\alpha a_\mathrm{B}^\beta} =0 The sum is the standard free energy change for the reaction, \Delta_\mathrm{r} G^\ominus . Therefore, \Delta_r G^\ominus = -RT \ln K where is the equilibrium constant. Note that activities and equilibrium constants are dimensionless numbers. This derivation serves two purposes. It shows the relationship between standard free energy change and equilibrium constant. It also shows that an equilibrium constant is defined as a quotient of activities. In practical terms this is inconvenient. When each activity is replaced by the product of a concentration and an activity coefficient, the equilibrium constant is defined as K= \frac{[\mathrm{S}]^\sigma[\mathrm{T}]^\tau}{[\mathrm{A}]^\alpha[\mathrm{B}]^\beta} \times \frac{\gamma_\mathrm{S}^\sigma \gamma_\mathrm{T}^\tau}{\gamma_\mathrm{A}^\alpha \gamma_\mathrm{B}^\beta} where [S] denotes the concentration of S, etc. In practice equilibrium constants are determined in a medium such that the quotient of activity coefficients is constant and can be ignored, leading to the usual expression K= \frac{[\mathrm{S}]^\sigma[\mathrm{T}]^\tau}{[\mathrm{A}]^\alpha[\mathrm{B}]^\beta} which applies under the conditions that the activity quotient has a particular (constant) value.
References
Electrochimica Acta Single-ion activity coefficients
Text derived from https://en.wikipedia.org/w/index.php?oldid=1371168976 under CC BY-SA 4.0; modifications have been made.