ADM-3A

The ADM-3A is an early influential video display terminal, introduced in 1976.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The ADM-3A is an early influential video display terminal, introduced in 1976. It was manufactured by Lear Siegler and has a 12-inch screen displaying 12 or 24 lines of 80 characters. It set a new industry low single unit price of $995.

Its "dumb terminal" nickname came from some of the original trade publication advertisements. It quickly became commercially successful because of the rapid increase of computer communications speeds, and because of new minicomputer and microcomputer systems released to the market which required inexpensive operator consoles.

ADM-3

The ADM-3 followed, and the first manufactured units were introduced at the 1975 National Computer Conference in Anaheim, California, May 19–22, 1975, in booth 2348 at a price of $995. Its innovative wave-soldered single-board design, which includes the keyboard and all connectors, is packaged in an original clam shell enclosure.

Within weeks of the launch of the ADM-3, Dennis Cagan, Western Regional Sales Manager, started to book very large orders. Its "dumb terminal" nickname came from some of the original trade publication ads and quickly caught on industry wide. Due to two emerging trends, the device immediately became the best selling in the industry.

Computer communications speeds were rapidly increasing, and a wave of general-purpose and dedicated single-application minicomputer systems were hitting the market from dozens of manufacturers. These required inexpensive operator consoles that could match the speeds.

With no fast low-cost printers available, the ADM-3 (painted in a variety of custom colors for the OEMs) became the de facto standard. By December 20, 1976, the widely used Teletype Model 33 KSR electromechanical printing terminal, which could only print ten characters per second, sold for $895 or $32/month, while the ADM-3, which could display up to 1,920 characters per second, went for $995 or $36/month.

The ADM-3 was also offered in kit form and sold in computer hobby stores for $840–$875.

ADM-3 options

The original ADM-3 terminal displays only upper-case letters. In 1976, an option was added to allow it to display both lower and upper case. The base version of the terminal displays only 12 (rather than 24) rows of 80 characters.

In those days RAM was expensive, and halving the character count halved the RAM requirement. Likewise, all upper-case required only 6 bits per character to be stored rather than 7. Further optional add-ons included a graphics card, enabling it to emulate a Tektronix 4010, and an extension port which allows daisy chaining several ADM-3As on a single RS-232 line.

ADM-3A

In 1976, the ADM-3A was introduced. The ADM-3A added support for control codes to move the cursor around on the screen and directly position the cursor at any point in the display. It does not, however, support “clear to end of line” or “clear to end of screen”, or other more advanced codes that appeared in later terminals, such as the VT52 and VT100.

The ADM-3A's overall setup is controlled by 20 DIP switches under the nameplate at the front of the machine, beside the keyboard, including setting speed from 75 to 19,200 baud. The advanced configuration options allows split speed connection, sending at one rate, and receiving at another. Like the ADM-3 before it, the ADM-3A was offered as a kit.

It was $200 less than an assembled unit.

See also

Teletype Model 33

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378377161 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

24 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.