Lesson plan

Aerocapture

Aerocapture is an orbital transfer maneuver in which a spacecraft uses aerodynamic drag force from a single pass through a planetary atmosphere to decelerate and achieve orbit insertion. Aerocapture uses a planet's or moon's atmosphere to accomplish a quick, near-propellantless orbit insertion maneuver to place a spacecraft in its science orbit. The aerocapture maneuver starts as the spacecraft enters the atmosphere of the target body from an interplanetary approach trajectory. The aerodynamic drag generated as the vehicle descends into the atmosphere slows the spacecraft. After the spacecraft slows enough to be captured by the planet, it exits the atmosphere and executes a small propulsive burn at the first apoapsis to raise the periapsis outside the atmosphere. Additional small burns may be required to correct apoapsis and inclination targeting errors before the initial science orbit is established. Compared to conventional propulsive orbit insertion, this nearly fuel-free method of deceleration could significantly reduce the mass of an interplanetary spacecraft, as a substantial fraction of the spacecraft mass is often propellant used for the orbit insertion burn. The saving in propellant mass allows for more science instrumentation to be added to the mission, or allows for a smaller and less-expensive spacecraft, and, potentially, a smaller, less-expensive launch vehicle.…

Back to article

Article summary

Aerocapture is an orbital transfer maneuver in which a spacecraft uses aerodynamic drag force from a single pass through a planetary atmosphere to decelerate and achieve orbit insertion. Aerocapture uses a planet's or moon's atmosphere to accomplish a quick, near-propellantless orbit insertion maneuver to place a spacecraft in its science orbit. The aerocapture maneuver starts as the spacecraft enters the atmosphere of the target body from an interplanetary approach trajectory. The aerodynamic drag generated as the vehicle descends into the atmosphere slows the spacecraft. After the spacecraft slows enough to be captured by the planet, it exits the atmosphere and executes a small propulsive burn at the first apoapsis to raise the periapsis outside the atmosphere. Additional small burns may be required to correct apoapsis and inclination targeting errors before the initial science orbit is established. Compared to conventional propulsive orbit insertion, this nearly fuel-free method of deceleration could significantly reduce the mass of an interplanetary spacecraft, as a substantial fraction of the spacecraft mass is often propellant used for the orbit insertion burn. The saving in propellant mass allows for more science instrumentation to be added to the mission, or allows for a smaller and less-expensive spacecraft, and, potentially, a smaller, less-expensive launch vehicle.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.