Aerodynamic potential-flow code
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In fluid dynamics, aerodynamic potential flow codes or panel codes are used to determine the fluid velocity, and subsequently the pressure distribution, on an object. This may be a simple two-dimensional object, such as a circle or wing, or it may be a three-dimensional vehicle. A series of singularities as sources, sinks, vortex points and doublets are used to model the panels and wakes. These codes may be valid at subsonic and supersonic speeds.
In fluid dynamics, aerodynamic potential flow codes or panel codes are used to determine the fluid velocity, and subsequently the pressure distribution, on an object. This may be a simple two-dimensional object, such as a circle or wing, or it may be a three-dimensional vehicle. A series of singularities as sources, sinks, vortex points and doublets are used to model the panels and wakes. These codes may be valid at subsonic and supersonic speeds. Incompressible \nabla \cdot V=0 Irrotational \nabla \times V=0 Steady \frac{\partial}{\partial t}=0 However, the incompressible flow assumption may be removed from the potential flow derivation leaving: Potential flow (inviscid, irrotational, steady) \nabla^2 \phi=0 (1-M_\infty^2) \phi_{xx} + \phi_{yy} + \phi_{zz} = 0 (subsonic) From Divergence Theorem \iiint\limits_V\left(\nabla\cdot\mathbf{F}\right)dV=\iint\limits_{S}\mathbf{F}\cdot\mathbf{n}\, dS Let Velocity U be a twice continuously differentiable function in a region of volume V in space. This function is the stream function \phi . Let P be a point in the volume V Let S be the surface boundary of the volume V. Let Q be a point on the surface S, and R = |P-Q| . As Q goes from inside V to the surface of V, Therefore: U_p= -\frac{1} {4 \pi} \iiint\limits_V\left(\frac{\nabla^2\cdot\mathbf{U}}{R}\right) dV_Q -\frac{1} {4 \pi} \iint\limits_S\left(\frac{\mathbf{n}\cdot \nabla \mathbf{U} }{R}\right) dS_Q +\frac{1} {4 \pi} \iint\limits_S\left(\mathbf{U}\mathbf{n} \cdot\nabla \frac{1}{R}\right) dS_Q For : \nabla^2 \phi=0 , where the surface normal points inwards. \phi_p = -\frac{1} {4 \pi} \iint\limits_S\left(\mathbf{n} \frac{ \nabla \phi_{U} - \nabla \phi_{L}}{R} - \mathbf{n} \left( \phi_{U} - \phi_{L}\right) \nabla \frac{1}{R} \right) dS_Q This equation can be broken down into both a source term and a doublet term. The Source Strength at an arbitrary point Q is: \sigma = \nabla \mathbf{n} (\nabla \phi_U-\nabla \phi_L ) The Doublet Strength at an arbitrary point Q is: \mu =\phi_U - \phi_L The simplified potential flow equation is: \phi_p = -\frac{1} {4 \pi} \iint\limits_S\left(\frac{\sigma}{R} - \mu \cdot \mathbf{n} \cdot \nabla \frac{1}{R} \right) dS With this equation, along with applicable boundary conditions, the potential flow problem may be solved. \phi_L = 0 The Doublet Strength is: \mu =\phi_U - \phi_L \mu = \phi_U The velocity potential on the outer surface is normal to the surface and is equal to the freestream velocity. \phi_U = -V_\infty \cdot \mathbf{n} These basic equations are satisfied when the geometry is a 'watertight' geometry. If it is watertight, it is a well-posed problem. If it is not, it is an ill-posed problem. \mu_P = \frac{1} {4 \pi} \iint\limits_S\left(\frac{V_\infty \cdot \mathbf{n}}{R} \right) dS_U + \frac{1} {4 \pi} \iint\limits_S\left(\mu \cdot \mathbf{n} \cdot \nabla \frac{1}{R} \right) dS Note that the dS_U integration term is evaluated only on the upper surface, while th dS integral term is evaluated on the upper and lower surfaces. The continuous surface S may now be discretized into discrete panels. These panels will approximate the shape of the actual surface. This value of the various source and doublet terms may be evaluated at a convenient point (such as the centroid of the panel). Some assumed distribution of the source and doublet strengths (typically constant or linear) are used at points other than the centroid. A single source term s of unknown strength \lambda and a single doublet term m of unknown strength \lambda are defined at a given point. \sigma_Q = \sum_{i=1}^n \lambda_i s_i(Q)=0 \mu_Q = \sum_{i=1}^n \lambda_i m_i(Q) where: s_i = ln(r) m_i = These terms can be used to create a system of linear equations which can be solved for all the unknown values of \lambda . C_p = \frac{p-p_\infty}{q_\infty}=\frac{p-p_\infty}{\frac{1}{2} \rho_\infty V_\infty^2} = \frac{p-p_\infty}{\frac{\gamma}{2} p_\infty M_\infty^2 } The Isentropic Pressure Coefficient is: C_p = \frac{2} {\gamma M_\infty^2} \left( \left(1+\frac{\gamma-1} {2} M_\infty^2 \left[\frac{1-|\vec{V}|^2}
Notes
References
Public Domain Aerodynamic Software, A Panair Distribution Source, Ralph Carmichael Panair Volume I, Theory Manual, Version 3.0, Michael Epton, Alfred Magnus, 1990 Boeing Panair Volume II, Theory Manual, Version 3.0, Michael Epton, Alfred Magnus, 1990 Boeing Panair Volume III, Case Manual, Version 1.0, Michael Epton, Kenneth Sidewell, Alfred Magnus, 1981 Boeing Panair Volume IV, Maintenance Document, Version 3.0, Michael Epton, Kenneth Sidewell, Alfred Magnus, 1991 Boeing Recent Experience in Using Finite Element Methods For The Solution Of Problems In Aerodynamic Interference, Ralph Carmichael, 1971 NASA Ames Research Center NASA-TP-2995 Panel methods: An introduction, Larry L. Erickson, 1990 NASA
Text derived from https://en.wikipedia.org/w/index.php?oldid=1310128787 under CC BY-SA 4.0; modifications have been made.