Aerogel

Uses your system voice; voice and rate in settings.

Snapshot

≈ 13 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Aerogels are a class of synthetic porous ultralight material derived from a gel, in which the liquid component for the gel has been replaced with a gas, without significant collapse of the gel structure. The result is a solid with extremely low density and extremely low thermal conductivity. Aerogels can be made from a variety of chemical compounds.

Silica aerogels feel like fragile styrofoam to the touch, while some polymer-based aerogels feel like rigid foams. Aerogels are produced by extracting the liquid component of a gel through supercritical drying or freeze-drying.

This allows the liquid to be slowly dried off without causing the solid matrix in the gel to collapse from capillary action, as would happen with conventional evaporation. The first aerogels were produced from silica gels. Kistler's later work involved aerogels based on alumina, chromia, and tin dioxide.

Carbon aerogels were first developed in the late 1980s.

Aerogels are a class of synthetic porous ultralight material derived from a gel, in which the liquid component for the gel has been replaced with a gas, without significant collapse of the gel structure. The result is a solid with extremely low density and extremely low thermal conductivity. Aerogels can be made from a variety of chemical compounds.

Silica aerogels feel like fragile styrofoam to the touch, while some polymer-based aerogels feel like rigid foams. Aerogels are produced by extracting the liquid component of a gel through supercritical drying or freeze-drying.

This allows the liquid to be slowly dried off without causing the solid matrix in the gel to collapse from capillary action, as would happen with conventional evaporation. The first aerogels were produced from silica gels. Kistler's later work involved aerogels based on alumina, chromia, and tin dioxide.

Carbon aerogels were first developed in the late 1980s.

Properties

. Aerogels have excellent insulating properties, and the flower is protected from the heat of the flame. Despite the name, aerogels are solid, rigid, and dry materials that do not resemble a gel in their physical properties: the name is because they are made from gels.

Pressing softly on an aerogel typically does not leave even a minor mark; pressing more firmly will leave a permanent depression. Pressing extremely firmly will cause a breakdown in the sparse structure causing it to shatter like glass (a property known as friability), although more modern variations do not suffer from this.

Even though it is prone to shattering, it is very strong structurally. Its impressive load-bearing abilities are due to the dendritic microstructure in which spherical particles of average size 2–5 nm are fused together into clusters. These clusters form a three-dimensional highly porous structure of almost fractal chains, with pores just under 100 nm.

The average size and density of the pores can be controlled during the manufacturing process. An aerogel material can range from 50% to 99.98% air by volume, but in practice most aerogels exhibit somewhere between 90 and 99.8% porosity. Aerogels have a porous solid network that contains air pockets, with the air pockets taking up the majority of space within the material.

Aerogels are good thermal insulators because they almost nullify two of the three methods of heat transfer – conduction (they are mostly composed of insulating gas) and convection (the microstructure prevents net gas movement). They are good conductive insulators because they are composed almost entirely of gases, which are very poor heat conductors.

(Silica aerogel is an especially good insulator because silica is also a poor conductor of heat; a metallic or carbon aerogel, on the other hand, would be less effective.) They are good convective inhibitors because air cannot circulate through the lattice. Aerogels are poor radiative insulators because infrared radiation (which transfers heat) passes through them.

Owing to its hygroscopic nature, aerogel feels dry and acts as a strong desiccant. People handling aerogel for extended periods should wear gloves to prevent the appearance of dry brittle spots on their skin. The slight color it does have is due to Rayleigh scattering of the shorter wavelengths of visible light by the nano-sized dendritic structure.

This causes it to appear smoky blue against dark backgrounds and yellowish against bright backgrounds. Aerogels by themselves are hydrophilic, and if they absorb moisture they usually suffer a structural change, such as contraction, and deteriorate, but degradation can be prevented by making them hydrophobic, via a chemical treatment.

Aerogels with hydrophobic interiors are less susceptible to degradation than aerogels with only an outer hydrophobic layer, especially if a crack penetrates the surface.

Production

The preparation of silica aerogels typically involves three distinct steps: the sol-gel transition (gelation), the network perfection (aging), and the gel-aerogel transition (drying).

Materials

is supported by a piece of aerogel with a mass of 2 g.

Silica aerogel

Silica aerogels are the most common type of aerogel, and the primary type in use or study. It is silica-based and can be derived from silica gel or by a modified Stöber process. Nicknames include frozen smoke, solid smoke, solid air, solid cloud, and blue smoke, owing to its translucent nature and the way light scatters in the material.

The lowest-density silica nanofoam weighs 1,000 g/m 3 , which is the evacuated version of the record-aerogel of 1,900 g/m 3 . The density of air is 1,200 g/m 3 (at 20 °C and 1 atm). The silica solidifies into three-dimensional, intertwined clusters that make up only 3% of the volume.

Conduction through the solid is therefore very low. The remaining 97% of the volume is composed of air in extremely small nanopores. The air has little room to move, inhibiting both convection and gas-phase conduction.

Silica aerogel also has a high optical transmission of ~99% and a low refractive index of ~1.05. It is very robust with respect to high power input beam in continuous wave regime and does not show any boiling or melting phenomena.

This property permits to study high intensity nonlinear waves in the presence of disorder in regimes typically unaccessible by liquid materials, making it promising material for nonlinear optics. This aerogel has remarkable thermal insulative properties, although its thermal conductivity depends on formulation, density, pressure and measurement method.

In one transient hot-wire study of monolithic silica aerogel, Cohen and Glicksman reported that the thermal conductivity decreased from 9.3 mW·m −1 ·K −1 (0.0093 W·m −1 ·K −1 ) at 1 atm to 3.2 mW·m −1 ·K −1 (0.0032 W·m −1 ·K −1 ) at 0.1 atm; the same aerogel in granular form had a thermal conductivity of 15.0 mW·m −1 ·K −1 at ambient gas pressure under modest compression. Its melting point is .

Until 2011, silica aerogel held 15 entries in Guinness World Records for material properties, including best insulator and lowest-density solid, though it was ousted from the latter title by the even lighter materials aerographite in 2012 and then aerographene in 2013.

Carbon

Carbon aerogels are composed of particles with sizes in the nanometer range, covalently bonded together. They have very high porosity (over 50%, with pore diameter under 100 nm) and surface areas ranging between 400 and 1,000 m 2 /g. They are often manufactured as composite paper: non-woven paper made of carbon fibers, impregnated with resorcinol–formaldehyde aerogel, and pyrolyzed.

Depending on the density, carbon aerogels may be electrically conductive, making composite aerogel paper useful for electrodes in capacitors or deionization electrodes. Due to their extremely high surface area, carbon aerogels are used to create supercapacitors, with values ranging up to thousands of farads based on a capacitance density of 104 F/g and 77 F/cm 3 .

Carbon aerogels are also extremely "black" in the infrared spectrum, reflecting only 0.3% of radiation between 250 nm and 14.3 μm, making them efficient for solar energy collectors. The term "aerogel" to describe airy masses of carbon nanotubes produced through certain chemical vapor deposition techniques is incorrect.

Such materials can be spun into fibers with strength greater than Kevlar, and unique electrical properties. These materials are not aerogels, however, since they do not have a monolithic internal structure and do not have the regular pore structure characteristic of aerogels.

Metal oxide

Metal oxide aerogels are used as catalysts in various chemical reactions/transformations or as precursors for other materials. Aerogels made with aluminium oxide are known as alumina aerogels. These aerogels are used as catalysts, especially when "doped" with a metal other than aluminium.

Nickel–alumina aerogel is the most common combination. Alumina aerogels are also being considered by NASA for capturing hypervelocity particles; a formulation doped with gadolinium and terbium could fluoresce at the particle impact site, with the amount of fluorescence dependent on impact energy.

One of the most notable differences between silica aerogels and metal oxide aerogel is that metal oxide aerogels are often variedly colored.

Other

Organic polymers can be used to create aerogels. SEAgel is made of agar. Cellulose from plants can be used to create a flexible aerogel.

GraPhage13 is the first graphene-based aerogel assembled using graphene oxide and the M13 bacteriophage. Chalcogel is an aerogel made of chalcogens (the column of elements on the periodic table beginning with oxygen) such as sulfur, selenium, and other elements. Metals less expensive than platinum have been used in its creation.

Aerogels made of cadmium selenide quantum dots in a porous 3-D network have been developed for use in the semiconductor industry. Aerogel performance may be augmented for a specific application by the addition of dopants, reinforcing structures, and hybridizing compounds. For example, Spaceloft is a composite of aerogel with some kind of fibrous batting.

Amyloid fibrils from food waste (whey) have the potential for use in AF aerogels for gold extraction from e-waste. Their use would have a less environmental impact than that of the conventional use of activated carbon as adsorbent.

Applications

Aerogels are used in a wide range of applications because of their low density, low thermal conductivity, and high surface area. Silica aerogels were the first to be developed commercially and remain the most widely used type.

Flexible polymer-based aerogels have been developed to overcome the brittleness of traditional silica aerogels and enable thin, mechanically compliant insulating materials for aerospace and electronic systems. Polyimide aerogel films derived from NASA-developed aerogel technology have been commercialized for such applications; examples include the polyimide aerogel film AeroZero.

Aircraft de-icing: An carbon nanotube aerogel could cover the wings of a jumbo jet. Aerogel heaters could operate continuously at low power, preventing ice from forming. Catalyst or catalyst carrier.

Chemical adsorber: Silica aerogels have high surface area, porosity, and are ultrahydrophobic. They may be used to remove heavy metals, for example in wastewater treatment. Cosmic dust capture: NASA used aerogel to trap space dust particles aboard the Stardust spacecraft.

The particles vaporize on impact with solids and pass through gases, but can be trapped in aerogels. NASA also used aerogel for thermal insulation for the Mars rovers. Drug delivery: Drugs can be adsorbed from supercritical with release rate controlled by varying the aerogel properties.

Electrochemical double layer supercapacitors. Aerogels' high surface area allow capacitors that are .02-.05% the size of similarly rated electrolytic capacitors. Electromagnetic shielding Energy absorbers Fuel cells: platinum-on-carbon catalysts.

Imaging devices, optics, and light guides. Impedance matchers for transducers, speakers and range finders. Inertial Confinement Fusion (ICF) and X-ray laser targets: In ICF, it is used as low-density target materials to create foam targets that aid in simulating the conditions necessary for fusion.

Their low-density structure allows for precise control over the fusion fuel, facilitating efficient compression and heating by the laser energy. Introducing disorder into superfluid helium-3. Organic insulator: valued for their large surface areas Radiative cooling: Aerogels can aid in thermal emittance at lower cost and environmental impact than other materials.

Passive thermal protection: The US Navy evaluated aerogels for use in diver undergarments and by NASA for insulating space suits. Radiators in Cherenkov effect detectors: The ACC system of the Belle detector used aerogels in the Belle experiment at KEKB, because of their low index of refraction, filling the gap between gases and liquids, and their transparency and solid state, making them easier to use than cryogenic liquids or compressed gases.

Sensors Sound insulation, on windows or during construction. Tennis rackets: Dunlop Sport uses aerogel in some racquets. Textiles and other flexible materials: "Commercial manufacture of aerogel 'blankets' began around the year 2000, combining silica aerogel and fibrous reinforcement that turns the brittle aerogel into a durable, flexible material.

The mechanical and thermal properties of the product may be varied based upon the choice of reinforcing fibers, the aerogel matrix and opacification additives included in the composite." Thermal insulation: fibre-reinforced silica aerogel insulation boards insulation can be about 50% as thick as conventional materials. They are -suited for historic building retrofit,.

Aerogel has been added in granular form to skylights for this purpose. Georgia Institute of Technology's 2007 Solar Decathlon House project used an aerogel as an insulator in its translucent roof. Transmission tunnel of the Chevrolet Corvette (C7).

CamelBak thermal sport bottle. 45 North uses aerogel to keep hands warm in its Sturmfist 5 cycling gloves. Thickening agents in paints and cosmetics.

Warheads: Fogbank, a material of secret composition used in U.S. thermonuclear warheads, may be an aerogel. Waste disposal Water purification: Chalcogels can absorb metal pollutants such as mercury, lead, and cadmium. Aerogels can also absorb oil, for example to respond to oil spills.

Aerogels can disinfect water. Photothermal aerogels can purify water by accelerating evaporation.

See also

Boron nitride aerogel Carbon nanofoam Fogbank Nanogel Down feather heliumgel of graphene

Open-source aerogel Aerogel Research at LBL: From the Lab to the Marketplace, Jeffery Kahn, Summer 1991, Berkeley Lab (Lawrence Berkeley National Laboratory)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378713356 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

25 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.