Aeronca E-107

The Aeronca E-107 was one of the first low-cost reliable engines of the post-World War I era.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Aeronca E-107 was one of the first low-cost reliable engines of the post-World War I era.

Design and development

, with the E-107 "flathead" engine The E-107A was a production aviation flathead engine designed to replace a Morehouse engine on the first prototype of the Aeronca C-2. The first five were produced without cooling fins on the crankcase, but with all versions having air-cooling fins atop the cylinder heads, similar to many air-cooled two-stroke engines in appearance.

A Winfleld Model 5 carburetor was standard for the engine. The E-107 was replaced by the uprated, overhead valvetrain E-113 engine based on the same design.

Variants

E-107:Standard production engine E-107A:The E-107A was produced for Aeronca by the Govro-Nelson Company of Detroit, Michigan. O-107:Designation given to engines fitted to impressed aircraft

Applications

Aeronca C-2 Pickering-Pearson KP.2

Engines on display

An E-107 is on display at the EAA Airventure Museum in Oshkosh, Wisconsin The restored first prototype Aeronca C-2 (registration NC626N) fitted with an E-107 is on display at the Udvar-Hazy building of the Smithsonian's National Air and Space Museum.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1321497793 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.