Lesson plan

Aggregate modulus

In relation to biomechanics, the aggregate modulus (Ha) is a measurement of the stiffness of a material at equilibrium when fluid has ceased flowing through it, under the application of a constant load or strain in a confined compression configuration. The aggregate modulus can be calculated from Young's modulus (E) and the Poisson ratio (v). : Ha=\frac{E(1-v)}{(1+v)(1-2v)} The aggregate modulus of a similar specimen is determined from a unidirectional deformational testing configuration, i.e., the only non-zero strain component is E 11 . This configuration is opposed to the Young's modulus, which is determined from a unidirectional loading testing configuration, i.e., the only non-zero stress component is, say, in the e 1 direction. In this test, the only non-zero component of the stress tensor is T 11 .

Back to article

Article summary

In relation to biomechanics, the aggregate modulus (Ha) is a measurement of the stiffness of a material at equilibrium when fluid has ceased flowing through it, under the application of a constant load or strain in a confined compression configuration. The aggregate modulus can be calculated from Young's modulus (E) and the Poisson ratio (v). : Ha=\frac{E(1-v)}{(1+v)(1-2v)} The aggregate modulus of a similar specimen is determined from a unidirectional deformational testing configuration, i.e., the only non-zero strain component is E 11 . This configuration is opposed to the Young's modulus, which is determined from a unidirectional loading testing configuration, i.e., the only non-zero stress component is, say, in the e 1 direction. In this test, the only non-zero component of the stress tensor is T 11 .

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.