Agraffe

Article summary

An agraffe is a part used principally on grand pianos. The agraffe is a guide at the tuning-pin end of the string, screwed into the plate, with holes through which the strings pass. It positions the strings vertically and laterally, determines the string's speaking length, and offers a clean termination from which the string can vibrate. Agraffes are used in the bass, tenor, and lower treble, but commonly give way to a capo d'astro bar in the upper treble. Agraffes are usually made of solid brass, and come in 1, 2 or 3-string configurations. For American pianos they are available in two sizes (1/4" and 7/32" finely threaded studs). The string holes are typically countersunk to eliminate the likelihood of buzzing, even as the agraffes wear. They are installed with their width perpendicular to the strings.

Key claims

No claims recorded.

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.