Air Command Commander 147A
The Air Command Commander 147A was an American autogyro that was designed and produced by Air Command International when it was located in Wylie, Texas.
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Air Command Commander 147A was an American autogyro that was designed and produced by Air Command International when it was located in Wylie, Texas. Now out of production, the aircraft was intended to be supplied as a kit for amateur construction. The only example known to have been registered with the Federal Aviation Administration (FAA) was the factory prototype, which was destroyed in a fatal test flight crash in Caddo Mills, Texas in July 1998.
Design and development
The Commander 147A was designed to comply with the US homebuilt aircraft rules. It featured a Skywheels single main rotor, a two-seats-in side-by-side configuration enclosed cockpit, tricycle landing gear with wheel pants, plus a small tail caster and a Mazda 13B Wankel engine engine in pusher configuration.
The aircraft fuselage was made from bolted-together aluminum tubing with a fiberglass fairing. Its two-bladed rotor had a diameter of . The aircraft had a standard empty weight of and a gross weight of , giving a useful load of .
Factory options included a long-range fuel tank, electric trim and a main rotor pre-rotator.
Operational history
The factory prototype, serial number 001, registration number N147GY, suffered a loss of rotor RPM while maneuvering over a runway at Caddo Mills Municipal Airport during a factory test flight on 15 July 1998. The rotor blades struck the tail boom, and the aircraft descended and impacted the ground in a nose-low attitude.
A post-crash fire consumed the main wreckage, and the pilot, who was the sole occupant, was killed. The accident was attributed to "the pilot's failure to maintain rotor rpm while maneuvering, which resulted in the main rotor blades contacting the tail section of the gyroplane."
By May 2018, no examples were registered in the United States, with only N147GY listed as having been registered at one time; it is listed as "destroyed". |ref=Purdy |prime units?=imp |genhide= |crew=one |capacity=one passenger |length m= |length ft=14 |length in=0 |length note= |width m= |width ft= |width in= |width note= |height m= |height ft= |height in= |height note= |airfoil= |empty weight kg= |empty weight lb=700 |empty weight note= |gross weight kg= |gross weight lb=1500 |gross weight note= |fuel capacity= |more general= |eng1 number=1 |eng1 name=Mazda 13B |eng1 type= Wankel engine automotive engine |eng1 kw= |eng1 hp=160 |prop blade number=2 |prop name=Warp Drive Inc ground adjustable pitch |prop dia m= |prop dia ft=5 |prop dia in=8 |prop dia note= |rot number=1 |rot dia m= |rot dia ft=31 |rot dia in=0 |rot area sqm= |rot area sqft=754 |rot area note= |perfhide= |max speed kmh= |max speed mph=120 |max speed kts= |max speed note= |cruise speed kmh= |cruise speed mph=85 |cruise speed kts= |cruise speed note= |never exceed speed kmh= |never exceed speed mph= |never exceed speed kts= |never exceed speed note= |range km= |range miles= |range nmi= |range note= |endurance= |ceiling m= |ceiling ft= |ceiling note= |g limits= |roll rate= |glide ratio= |climb rate ms= |climb rate ftmin= |climb rate note= |time to altitude= |disk loading kg/m2= |disk loading lb/sqft=1.98 |disk loading note= |fuel consumption kg/km= |fuel consumption lb/mi= |power/mass= |thrust/weight= |more performance= |avionics= }}
See also
List of rotorcraft
External links
Photo of an Air Command Commander 147A
Text derived from https://en.wikipedia.org/w/index.php?oldid=1321157690 under CC BY-SA 4.0; modifications have been made.