Air Command Commander Elite

The Air Command Commander Elite is an American autogyro that was designed and produced by Air Command International of Caddo Mills, Texas.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Air Command Commander Elite is an American autogyro that was designed and produced by Air Command International of Caddo Mills, Texas. When it was available, the aircraft was supplied as a kit for amateur construction or as a conversion kit for the earlier Air Command Commander. As of 2012, the design is no longer advertised for sale by the company.

Design and development

The Commander Elite improves on the original Commander in that it has raised landing gear that positions the engine thrustline vertically at the center of gravity, eliminating changes in pitch with throttle changes. The gyroplane was designed to comply with the US Experimental - Amateur-built rules.

It features a single main rotor, a single-seat open cockpit without a windshield, tricycle landing gear, and a twin cylinder, two-stroke, liquid-cooled, dual-ignition Rotax 582 engine in pusher configuration. The aircraft's diameter Rotordyne rotor has a chord of . The rudder and tailplane are made from carbon fiber.

The Commander Elite has a typical empty weight of and a gross weight of , giving a useful load of .

Operational history

By December 2012, ten examples had been registered in the United States with the Federal Aviation Administration.

See also

List of rotorcraft

Text derived from https://en.wikipedia.org/w/index.php?oldid=1321153802 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.