Air traffic controller
An air traffic controller (ATC) is a person responsible for the coordination of air traffic within controlled airspace.
≈ 6 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
An air traffic controller (ATC) is a person responsible for the coordination of air traffic within controlled airspace. Typically they work in area control centers or control towers, where they monitor aircraft movements and maintain direct communication with the pilots.
The profession dates back to the early 20th century, evolving alongside advances in aviation and radar technology to meet the growing demands of air travel. It is considered to be highly demanding and stressful, requiring continuous decision-making and adaptability, often under time pressure.
Factors such as unfavorable work schedules, high responsibility and the reliability of equipment further influence workload and stress levels. Despite these challenges, the role offers competitive salaries and strong job security, which are often cited as key benefits.
Area controllers
Area controllers (also called "en route" or in the US "center controllers") oversee aircraft at higher altitudes, in the en-route phase of their flight surrounding busier airports and airspace. In contrast to tower controllers, their job is dominated by the discovery of conflicts.
Area controllers may also handle aircraft at lower altitudes as well as air traffic around small airports that do not have their own towers or approach controllers. Area controllers are responsible for specific sectors of 3D blocks of airspace with defined dimensions.
Each sector is managed by at least one area controller, known as an "R-side" (Radar) controller that handles radio communications. During busier times of traffic, there may also be a second area controller, known as a "D-side" (Data), assigned to the same area in order to assist the R-side Area controller.
This can be done with or without the use of radar: radar allows a sector to handle much more traffic; however, procedural control is used in many areas where traffic levels do not justify radar or the installation of radar is not feasible, such as over oceans. Area controllers operate within area control centers, also known as centers or en-route centers. where they are controlling high-level en-route aircraft.
In the US, these facilities are specifically referred to as Air Route Traffic Control Centers (ARTCCs). Area controllers can also work in terminal control centers, which control aircraft climbing from or descending to major groups of airports.
Civilian/military
Civilian ATCs handle commercial and general aviation such as airliners and private jets while military controllers usually oversee airspace or airports of armed forces. Some civilian airports are part of military airports and therefore serviced by military controllers also known as joint-use. In some countries all air traffic controlling is handled by the military and all controllers are soldiers. , 1962|217x217px
Work patterns
Typically, controllers work between 90 and 120 minutes followed by a 30-minute break. Except at smaller airports with little air traffic volume, air traffic control operates nonstop, requiring controllers to work rotating shifts that include nights, weekends, and public holidays. Shift schedules are usually set 28 days in advance.
In many countries, the structure of controllers' shift patterns is regulated to allow for adequate time off. The shift pattern often varies depending on country, facility and its location.
In the US the Federal Aviation Administration (FAA) regulates the hours that an air traffic controller may work: controllers may not work more than 10 straight hours during a shift, which includes required breaks, and must have 9 hours of rest before their next shift. Additionally they usually work a relatively unique rotating shift schedule, called the 2-2-1.
Working on this schedule means rotating between two afternoon shifts, two morning shifts and a midnight shift over the course of a week.
Stress
Many countries regulate work hours to ensure that controllers are able to remain focused and effective. Research suggests that after prolonged periods of continuous work for more than two hours, performance can deteriorate rapidly, even at low traffic levels. The International Civil Aviation Organization (ICAO) therefore recommends breaks at least every two hours.
In a study which compared stress in the general population and in this kind of systems markedly showed more stress level for controllers. This variation can be explained, at least in part, by the characteristics of the job.
Education
Civilian air traffic controllers' licensing is standardized by international agreement through the ICAO. Many countries have air traffic control schools, which are often operated by the provider of air traffic services in that country or sometimes privately. These institutions provide training to individuals without any prior air traffic control experience.
After the completion of academic training, the graduating student will be granted an Air Traffic Control license, which will include one or more Ratings. These are sub-qualifications denoting the air traffic control discipline or disciplines in which the person has been trained.
The ICAO defines five such ratings: Area (procedural) Area Radar Approach (procedural) Approach Radar Aerodrome In the United States, controllers may train in several similar specialties: Tower Ground-Controlled Approach (GCA) Terminal Radar Control En route Control (both radar and non-radar) This phase of training takes about 3–5 months. Whenever an air traffic controller is posted to a new unit or starts work on a new sector within a particular unit, they must undergo a period of training regarding the procedures peculiar to that particular unit and/or sector.
The majority of this training is done in a live position controlling real aircraft and is referred to as On the Job Training (OJT). In this phase trainees are always with a fully qualified and trained mentor or an On the Job Training Instructor (OJTI), who will also be 'plugged into' the position to give guidance and is ready to immediately take over should it become necessary.
The length of this phase of training usually varies between one and three years, depending on the complexity of the sector. Only once a person has passed all training stages they will be allowed to control a position alone.
See also
Air traffic controllers' strike of 1981 (United States) Aviation safety Flight planning List of aviation and ATC simulation software The Guild of Air Traffic Control Officers National Air Traffic Controllers Association
External links
Air Traffic Control Association Unique Aviation Career as an Air Traffic Controller , by James Wynbrandt, Flying (magazine) ATSA Test Air Traffic Control management
Text derived from https://en.wikipedia.org/w/index.php?oldid=1375418450 under CC BY-SA 4.0; modifications have been made.