Lesson plan
Amplification factor
The amplification factor, also called gain, is the extent to which an analog amplifier boosts the strength of a signal. Amplification factors are usually expressed in terms of power. The decibel (dB), a logarithmic unit, is the most common way of quantifying the gain of an amplifier. In general an amplification factor is the numerical multiplicative factor by which some quantity is increased. * In structural engineering the amplification factor is the ratio of second order to first order deflections. * In electronics the amplification factor, or gain, is the ratio of output to input in an amplifier. In vacuum-tube theory the amplification factor (μ) of a triode has a more specific meaning: it is the ratio of the change in plate voltage to the change in control-grid voltage required to produce the same change in plate current. This parameter is commonly determined from families of plate-current characteristic curves as described in Vacuum tube characteristics. * In numerical analysis the amplification factor is a number derived using Von Neumann stability analysis to determine stability of a numerical scheme for a partial differential equation.
Article summary
The amplification factor, also called gain, is the extent to which an analog amplifier boosts the strength of a signal. Amplification factors are usually expressed in terms of power. The decibel (dB), a logarithmic unit, is the most common way of quantifying the gain of an amplifier. In general an amplification factor is the numerical multiplicative factor by which some quantity is increased. * In structural engineering the amplification factor is the ratio of second order to first order deflections. * In electronics the amplification factor, or gain, is the ratio of output to input in an amplifier. In vacuum-tube theory the amplification factor (μ) of a triode has a more specific meaning: it is the ratio of the change in plate voltage to the change in control-grid voltage required to produce the same change in plate current. This parameter is commonly determined from families of plate-current characteristic curves as described in Vacuum tube characteristics. * In numerical analysis the amplification factor is a number derived using Von Neumann stability analysis to determine stability of a numerical scheme for a partial differential equation.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.