Anchor bolt
≈ 6 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Anchor bolts are used to connect structural and non-structural elements to concrete. The connection can be made by a variety of different components: anchor bolts (also named fasteners), steel plates, or stiffeners. Anchor bolts transfer different types of load: tension forces and shear forces. A connection between structural elements can be represented by steel columns attached to a reinforced concrete foundation. A common case of a non-structural element attached to a structural one is the connection between a facade system and a reinforced concrete wall.
Anchor bolts are used to connect structural and non-structural elements to concrete. The connection can be made by a variety of different components: anchor bolts (also named fasteners), steel plates, or stiffeners. Anchor bolts transfer different types of load: tension forces and shear forces. A connection between structural elements can be represented by steel columns attached to a reinforced concrete foundation. A common case of a non-structural element attached to a structural one is the connection between a facade system and a reinforced concrete wall.
Types
Cast-in-place
The simplest – and strongest – form of anchor bolt is cast-in-place, with its embedded end consisting of a standard hexagonal head bolt and washer, 90-bend, or some sort of forged or welded flange (see also stud welding). The last are used in concrete-steel composite structures as shear connectors. Other uses include anchoring machines to poured concrete floors and buildings to their concrete foundations. Various typically disposable aids, mainly of plastic, are produced to secure and align cast-in-place anchors prior to concrete placement.
Moreover, their position must also be coordinated with the reinforcement layout. Different types of cast-in-place anchors might be distinguished: Lifting inserts: used for lifting operations of plain or prestressed reinforced concrete beams. The insert can be a threaded rod. See also bolt (climbing). Anchor channels: used in precast concrete connections. The channel can be a hot-rolled or a cold-formed steel shape in which a T-shape screw is placed in order to transfer the load to the base material.
Headed stud: consist of a steel plate with headed studs welded on (see also threaded rod). Threaded sleeves: consist of a tube with an internal thread which is anchored back into the concrete. For all the type of the cast-in-place anchors, the load-transfer mechanisms is the mechanical interlock, i.e. the embedded part of the anchors in concrete transfers and the applied load (axial or shear) via bearing pressure at the contact zone.
At failure conditions, the level of bearing pressure can be higher than 10 times the concrete compressive strength, if a pure tension force is transferred. Cast-in-place type anchors are also utilized in masonry applications, placed in wet mortar joints during the laying of brick and cast blocks (CMUs).
Post-installed
Post-installed anchors can be installed in any position of hardened concrete after a drilling operation. A distinction is made according to their principle of operation.
Bonded anchors
Bonded anchors are also referred as adhesive anchors or chemical anchors. The anchoring material is an adhesive (also called mortar) usually consisting of epoxy, polyester, or vinylester resins. In bonded anchors, the force-transfer mechanism is based on bond stresses provided by binding organic materials. Both ribbed bars and threaded rods can be used and a change of the local bond mechanism can be appreciated experimentally.
In ribbed bars the resistance is prevalently due to shear behavior of concrete between the ribs whereas for threaded rods friction prevails (see also anchorage in reinforced concrete). The performance of this anchor's types in terms of 'load-bearing capacity', especially under tension loads, is strictly related to the cleaning condition of the hole. Experimental results showed that the reduction of the capacity is up to 60%. The same applies also for moisture condition of concrete, for wet concrete the reduction is of 20% using polyester resin.
Other issues are represented by high temperature behavior and creep response.
Mechanical behavior
File:Steel Failure.png|Steel failure File:Concrete Cone Failure.png|Concrete cone failure File:Pull-Out failure.png|Pull-out failure File:Pull-Through failure.png|Pull-through failure File:Blow Out Failure.png|Blow-out failure File:Splitting Failure.png|Splitting failure File:Concrete Edge failure.png|Concrete edge failure File:Pry Out Failure.png|Pry-out failure
Group of anchors
In order to increase the load-carrying capacity anchors are assembled in group, moreover this allow also to arrange a bending moment resisting connection. For tension and shear load, the mechanical behavior is markedly influenced by (i) the spacing between the anchors and (ii) the possible difference in the applied forces.
Service load behavior
Under service loads (tension and shear) anchor's displacement must be limited. The anchor performance (load-carrying capacity and characteristic displacements) under different loading condition is assessed experimentally, then an official document is produced by technical assessment body. In design phase, the displacement occurring under the characteristic actions should be not larger than the admissible displacement reported in the technical document.
Seismic load behavior
Under seismic loads and there would be the possibility that an anchor is contemporarily (i) installed in a crack and (ii) subjected to inertia loads proportional both to the mass and the acceleration of the attached element (secondary structure) to the base material (primary structure). The load conditions in this case can be summarized as follow: Pulsating axial load: Force aligned with the anchor's axis, positive in case of pullout condition and zero in case of pushing-in.
Reverse shear load (also called alternate shear): Force perpendicular to the anchor's axis, positive and negative depending on an arbitrary sign convention. Cyclic crack (also called crack movement): Reinforced concrete primary structure undergoes in severe damage condition (i.e. cracking) and the most un-favorable case for anchor performance is when the crack plane contains the anchor's axis and the anchor is loaded by a positive axial force (constant during crack cycles).
Exceptional loads behavior
Exceptional loads differ from ordinary static loads for their rise time. High displacement rates are involved in impact loading. Regarding steel to concrete connections, some examples consist in collision of vehicle on barriers connected to concrete base and explosions. Apart from these extraordinary loads, structural connections are subjected to seismic actions, which rigorously have to be treated via dynamic approach. For instance, seismic pull-out action on anchor can have 0.03 seconds of rise time.
On the contrary, in a quasi-static test, 100 second may be assumed as time interval to reach the peak load. Regarding the concrete base failure mode: Concrete cone failure loads increase with elevated loading rates with respect the static one. File:Ancor bolt for concrete.JPG|Wedge type - 1 File:Betonanker.jpg|Expansion type File:Fischer FH.jpg|Sleeve type File:Metall-Fensterrahmendübel F10 M132 1756.JPG|Wedge type - 2 File:Bonded Anchor.png|Bonded anchor File:Concrete Screw.png|Concrete screw
See also
Well nut
References
Text derived from https://en.wikipedia.org/w/index.php?oldid=1373603220 under CC BY-SA 4.0; modifications have been made.