Lesson plan
angle plate
An angle plate is a work holding device used as a fixture in metalworking, including grinding. Angle plates are used to hold workpieces square to the table during marking out operations. Adjustable angle plates are also available for workpieces that need to be inclined, usually towards a milling cutter. Angle plates are made from high-quality material (generally spheroidal cast iron) that has been stabilized to prevent further movement or distortion. Slotted holes or "T" bolt slots are machined into the surfaces to enable the secure attachment or clamping of workpieces to the plate, and the plate to the worktable. The knee type angle plate is typically used for grinding work.
Article summary
An angle plate is a work holding device used as a fixture in metalworking, including grinding. Angle plates are used to hold workpieces square to the table during marking out operations. Adjustable angle plates are also available for workpieces that need to be inclined, usually towards a milling cutter. Angle plates are made from high-quality material (generally spheroidal cast iron) that has been stabilized to prevent further movement or distortion. Slotted holes or "T" bolt slots are machined into the surfaces to enable the secure attachment or clamping of workpieces to the plate, and the plate to the worktable. The knee type angle plate is typically used for grinding work.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.