Lesson plan
aperture
In optics, the aperture of an optical system (including a system consisting of a single lens) is the hole or opening that primarily limits light propagated through the system. The aperture defines a set of rays from each point on an object that will come to a focus in the image plane, called a bundle of rays or cone of rays, mathematically a generalized cone (or a bundle of half-lines). An optical system typically has many structures that limit ray bundles. These structures may be the edge of a lens or mirror, or a ring or other fixture that holds an optical element in place or may be a special element such as a diaphragm placed in the optical path to limit the light admitted by the system. These structures are called stops, and the aperture stop is the stop that primarily determines the base of the cone of rays that an optical system accepts (see entrance pupil). As a result, it also determines the ray cone angle and brightness at the image point (see exit pupil). Optical systems are typically designed for a particular stop to be the aperture stop, but it is possible for different stops to serve as the aperture stop for objects at different distances. Some rays from object points away from the optical axis may clip on surfaces other than the aperture stop, creating a vignetting effect. The aperture stop is not necessarily the smallest stop in the system.…
Article summary
In optics, the aperture of an optical system (including a system consisting of a single lens) is the hole or opening that primarily limits light propagated through the system. The aperture defines a set of rays from each point on an object that will come to a focus in the image plane, called a bundle of rays or cone of rays, mathematically a generalized cone (or a bundle of half-lines). An optical system typically has many structures that limit ray bundles. These structures may be the edge of a lens or mirror, or a ring or other fixture that holds an optical element in place or may be a special element such as a diaphragm placed in the optical path to limit the light admitted by the system. These structures are called stops, and the aperture stop is the stop that primarily determines the base of the cone of rays that an optical system accepts (see entrance pupil). As a result, it also determines the ray cone angle and brightness at the image point (see exit pupil). Optical systems are typically designed for a particular stop to be the aperture stop, but it is possible for different stops to serve as the aperture stop for objects at different distances. Some rays from object points away from the optical axis may clip on surfaces other than the aperture stop, creating a vignetting effect. The aperture stop is not necessarily the smallest stop in the system.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.