Lesson plan

Apollo Guidance Computer

The Apollo Guidance Computer (AGC) is a digital computer produced for the Apollo program that was installed on board each Apollo command module (CM) and Apollo Lunar Module (LM). The AGC provided computation and electronic interfaces for guidance, navigation, and control of the spacecraft. The AGC was the first computer based on silicon integrated circuits (ICs). The computer's performance was comparable to the first generation of home computers from the 1970s, such as the Kenbak-1, Apple II, TRS-80, and Commodore PET. At around in size, the AGC held 4,100 IC packages. The AGC has a 16-bit word length, with 15 data bits and one parity bit. Most of the software on the AGC is stored in a special read-only memory known as core rope memory, fashioned by weaving wires through and around magnetic cores, though a small amount of read/write core memory is available. Astronauts communicated with the AGC using a numeric display and keyboard called the DSKY (for "display and keyboard", pronounced ). The AGC and its DSKY user interface were developed in the early 1960s for the Apollo program by the MIT Instrumentation Laboratory and first flew in 1966. The onboard AGC systems were secondary, as NASA conducted primary navigation with mainframe computers in Houston.

Back to article

Article summary

The Apollo Guidance Computer (AGC) is a digital computer produced for the Apollo program that was installed on board each Apollo command module (CM) and Apollo Lunar Module (LM). The AGC provided computation and electronic interfaces for guidance, navigation, and control of the spacecraft. The AGC was the first computer based on silicon integrated circuits (ICs). The computer's performance was comparable to the first generation of home computers from the 1970s, such as the Kenbak-1, Apple II, TRS-80, and Commodore PET. At around in size, the AGC held 4,100 IC packages. The AGC has a 16-bit word length, with 15 data bits and one parity bit. Most of the software on the AGC is stored in a special read-only memory known as core rope memory, fashioned by weaving wires through and around magnetic cores, though a small amount of read/write core memory is available. Astronauts communicated with the AGC using a numeric display and keyboard called the DSKY (for "display and keyboard", pronounced ). The AGC and its DSKY user interface were developed in the early 1960s for the Apollo program by the MIT Instrumentation Laboratory and first flew in 1966. The onboard AGC systems were secondary, as NASA conducted primary navigation with mainframe computers in Houston.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.