Lesson plan
Apollo PGNCS
primary guidance system components primary guidance system components The Apollo primary guidance, navigation, and control system (PGNCS, pronounced pings) was a self-contained inertial guidance system that allowed Apollo spacecraft to carry out their missions when communications with Earth were interrupted, either as expected, when the spacecraft were behind the Moon, or in case of a communications failure. The Apollo command module (CM) and lunar module (LM) each carried a version of PGNCS. PGNCS, and specifically its computer, also served as the command centre for all system inputs from the CM and the LM, including the optical units, the radar system, the manual translation and rotation device inputs by the astronauts, and other inputs from the CM and LM systems. The MIT Instrumentation Laboratory developed PGNCS under the direction of Charles Stark Draper (the Instrumentation Laboratory was later named after him). The prime contractor for PGNCS and manufacturer of the inertial measurement unit (IMU) was the Delco Division of General Motors.…
Article summary
primary guidance system components primary guidance system components The Apollo primary guidance, navigation, and control system (PGNCS, pronounced pings) was a self-contained inertial guidance system that allowed Apollo spacecraft to carry out their missions when communications with Earth were interrupted, either as expected, when the spacecraft were behind the Moon, or in case of a communications failure. The Apollo command module (CM) and lunar module (LM) each carried a version of PGNCS. PGNCS, and specifically its computer, also served as the command centre for all system inputs from the CM and the LM, including the optical units, the radar system, the manual translation and rotation device inputs by the astronauts, and other inputs from the CM and LM systems. The MIT Instrumentation Laboratory developed PGNCS under the direction of Charles Stark Draper (the Instrumentation Laboratory was later named after him). The prime contractor for PGNCS and manufacturer of the inertial measurement unit (IMU) was the Delco Division of General Motors.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.