APRS Calling

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

APRS Calling is a manual procedure for calling stations on the Automatic Packet Reporting System (APRS) to initiate communications on another frequency, or possibly by other means. It is inspired by Digital Selective Calling, a part of the Global Maritime Distress Safety System. It also builds on existing digital procedures inherited from morse code and radioteletype operation. ITU Q codes are used in conjunction with APRS text messages to implement APRS calling. APRS calling is intended to complement monitoring voice calling frequencies.

APRS Calling is a manual procedure for calling stations on the Automatic Packet Reporting System (APRS) to initiate communications on another frequency, or possibly by other means. It is inspired by Digital Selective Calling, a part of the Global Maritime Distress Safety System. It also builds on existing digital procedures inherited from morse code and radioteletype operation. ITU Q codes are used in conjunction with APRS text messages to implement APRS calling. APRS calling is intended to complement monitoring voice calling frequencies.

Procedure

The calling station sends a QSX signal to the station or group they wish to reach using an APRS text message. The QSX should include the necessary information for contact, possibly including frequency and mode. Once the called station or stations are ready to communicate on the specified channel, they answer using a QSX text message on APRS. The stations shift communications to the arranged channel.

Example

All APRS transmissions include the call sign programmed into the APRS unit. The text message doesn't necessarily require the station identification commonly seen in voice, CW or RTTY exchanges, so long as the programmed call sign is valid. This example shows N6BRK announcing a net on 147.480 MHz to the NALCO APRS group. When ready to communicate on the coordinated frequency, KJ6VVJ responds with an acknowledgment to the QSX. If the operating mode isn't obvious in context of the frequency, the initiating stations QSX should specify what it is.

See also

ACP-131 - Combined Communications-Electronics Board Communications Instructions / Operating Signals Amateur radio

References

American Radio Relay League. Field Service Form FSD-218. American Radio Relay League, 2004. Bass, Richard K. GMDSS A study guide for the Global Maritime Distress Safety System. Tele-Technology, 2007. Brehaut, Denise. GMDSS A User's Handbook. Bloomsbury Publishing Plc, 2009. Combined Communication Electronics Board (CCEB). Communications Instructions ACP 131 (F) Operating Signals. Combined Communications-Electronics Board, 2006.

External links

Amateur Radio Universal Text Messaging/Contact Initiative Automatic Voice Relay System ARRL Field Service Form FSD-218 (1/04)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1296536234 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.