Aptera Motors

American automotive company

Uses your system voice; voice and rate in settings.

Q4782224Snapshot

≈ 5 min read

Names in other languages

  • DeutschAptera Motors
  • EnglishAptera Motors
  • FrançaisAptera Motors
  • NederlandsAptera Motors
  • PortuguêsAptera Motors
  • azbاپترا موتورز
  • فارسیاپترا موتورز
  • 日本語アペラ・モーターズ

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Aptera Motors Corp. is a company developing an energy efficient electric two-seat three-wheeler solar electric vehicle. The company is based in Carlsbad, California. It was founded in 20191 and became publicly traded in 2025.

An earlier company, Aptera Motors Inc., was founded in 20061 but liquidated in 2011 after failing to get enough funding to start production of similar vehicles. The Zhejiang Jonway Group bought the intellectual property of Aptera Motors Inc. in 2012 and operated under the names Zaptera USA and Aptera USA, but ceased operations by 2014 without producing any vehicles.

The third iteration, Aptera Motors Corp., was founded in 2019, raised $140 million by April 2025, and another $17M by March 2026. The company ended 2025 with $10M in cash and an annual net loss of $44M. The company stated in its March 2026 financial filing that its low-scale production line will start at the earliest in March 2027, pending raising a further $50 million.

In June 2026, a company representative said they're targeting deliveries before the end of the year.

Aptera Mk-0 and Mk-1/Typ-1

The 2006 Aptera Motors Inc. vehicle design underwent several design revisions. The first two prototypes, Aptera Mk-0 and Mk-1, were concept cars for attracting investor funds, rather than production intent vehicles. The third vehicle, the Aptera 2e, was intended for production, but the required funding was not achieved.

The introductory press release stated its design would achieve , and included computer renderings of the vehicle. The body shape was estimated to have a , and would have sported a diesel engine and a permanent magnet DC motor. The design also called for a CVT and ultracapacitors, and would sell for under US$20,000 .

In September 2007, the Aptera Motors website was updated with the Aptera design dubbed the Aptera Typ-1, and the Mk-1 pre-production prototype. It was redesigned from the Mk-0 prototype by Jason Hill, who worked on the Smart Fortwo and Porsche Carrera GT and engineered by Nathan Armstrong, with a finished interior and new body styling.

Aptera Motors then began accepting reservations from California residents for its pilot models – then called the Typ-1e and Typ-1h which are the electric and EREV gasoline-hybrid variants respectively. A switch from a diesel hybrid to a gasoline-hybrid happened due to the difficulty to get the diesel engine emissions certified in California.

Aptera entered its vehicle into the automotive X-prize competition in September 2010 but the vehicle didn't finish the 50-lap trial as it overheated after 30 laps.

Aptera 2 Series

The next Aptera Motors Inc. design was a three-wheeled two-seat vehicle named the Aptera 2 Series. Its advertised fuel efficiency of , when plugged in every , would have made it one of the most fuel-efficient passenger vehicles in the world.

The first prototype attained a by making use of an "Eyes-Forward" rear-view camera system instead of side-view mirrors, which create a large amount of drag. A September 2008 Aptera newsletter showed a rendering of the car featuring a conventional driver-side mirror and no driver-side rear-view camera.

Aptera CTO Steve Fambro stated that the system was simplified to make use of a single camera mounted near the top of the vehicle. An early Aptera 2h design used a "small, water-cooled EFI gasoline engine with closed loop oxygen feedback and catalytic converter," coupled with a 12 kW generator/starter.

With a tank capacity of "up to five gallons," the Aptera 2h would have a claimed range of , compared to the range of the Aptera 2e. The 2h would have been a series hybrid: The engine would not be connected to the drivetrain, instead being used to recharge the batteries. The company opened pre-ordering for residents of California, but stopped taking deposits in July 2011.

The following month, Aptera announced it would return all deposits from customers who had signed up to buy a car.

Aptera 4-door

By the time of the original company's liquidation in 2011, it had abandoned development of the Aptera 2e and had begun design of a 5-passenger, 4-wheeled EV sedan with a lightweight composite body and a projected 130-mile range. No body and only a few test mules for the car were built.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1376620749 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Aptera Motors” revision 1376620749 · retrieved 2026-10-20 date of foundation (×3) · confidence 0.95 revision URL