Aqaba Flagpole

, Jordan, as seen from Eilat, Israel, is the tenth-tallest free-standing flagpole in the world.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

, Jordan, as seen from Eilat, Israel, is the tenth-tallest free-standing flagpole in the world. The Aqaba Flagpole in Aqaba, Jordan is a tall flagpole. This height makes it the tenth tallest free–standing and eleventh tallest flagpole in the world.

It was the tallest free–standing flagpole in the world until being surpassed by the tall Ashgabat Flagpole in 2008. It carries the flag of the Arab Revolt commemorating the Battle of Aqaba that took place in 1917. The flagpole can be seen from Israel, Egypt, and Saudi Arabia.

The flagpole was built in 2004 and opened on 3 October 2004.

, Jordan, as seen from Eilat, Israel, is the tenth-tallest free-standing flagpole in the world.]] ]] The Aqaba Flagpole in Aqaba, Jordan is a tall flagpole. This height makes it the tenth tallest free–standing and eleventh tallest flagpole in the world. It was the tallest free–standing flagpole in the world until being surpassed by the tall Ashgabat Flagpole in 2008.

It carries the flag of the Arab Revolt commemorating the Battle of Aqaba that took place in 1917. The flagpole can be seen from Israel, Egypt, and Saudi Arabia. The flagpole was built in 2004 and opened on 3 October 2004.

Technical data

Pole height: 130 meters (427 feet) Pole weight: 344,000 pounds (156 tonnes) Number of pole sections: 11 Bottom of pole diameter: 103 inches (2.6 metres) Top of pole diameter: 42 inches (1.1 metres) Bottom section plate thickness: 1.26 inches – Fy = 50 ksi Top section plate thickness: .394 inches – Fy = 36 ksi Maximum section length: Mating flanges thicknesses: Minimum: 1.58 inches, maximum Flange bolts maximum diameter: 3 inches Bolt material: A354, Fy = 115 ksi Foundation: square by deep, 990 cubic yards concrete

Design criteria

Flag size: by Flag material: Polyester Wind speed criteria: (pole and flag) - Wind speed criteria: (pole only) - Seismic zone: 4 (Uniform Building Code) Near seismic source: Less than 2 km (Aqaba Rift)

Codes

ANSI/NAAMFP-1001-97 – Guide Specification for Design Loads of Metal Flagpoles Structural engineer of record: Neil Moore and Associates Builder: Trident Support Corp. with assistance from US Flag and Flagpole Supply LP Contractor : Sahara contracting corporation, Amman, Jordan

Text derived from https://en.wikipedia.org/w/index.php?oldid=1367016373 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.