Lesson plan

Asynchronous Transfer Mode

Turboways ATM 155 PCI network interface card Asynchronous Transfer Mode (ATM) is a telecommunications standard defined by the American National Standards Institute and International Telecommunication Union Telecommunication Standardization Sector (ITU-T, formerly CCITT) for digital transmission of multiple types of traffic. ATM was developed to meet the needs of the Broadband Integrated Services Digital Network as defined in the late 1980s, and designed to integrate telecommunication networks. It can handle both traditional high-throughput data traffic and real-time, low-latency content such as telephony (voice) and video. ATM is a cell switching technology, providing functionality that combines features of circuit switching and packet switching networks by using asynchronous time-division multiplexing. ATM was seen in the 1990s as a competitor to Ethernet and networks carrying IP traffic, as it was faster and, unlike Ethernet, designed with quality-of-service in mind, but it fell out of favor once Ethernet reached speeds of 1 gigabit per second. In the Open Systems Interconnection (OSI) reference model data link layer (layer 2), the basic transfer units are called frames. In ATM, these frames are of a fixed length (53 octets) called cells.…

Back to article

Article summary

Turboways ATM 155 PCI network interface card Asynchronous Transfer Mode (ATM) is a telecommunications standard defined by the American National Standards Institute and International Telecommunication Union Telecommunication Standardization Sector (ITU-T, formerly CCITT) for digital transmission of multiple types of traffic. ATM was developed to meet the needs of the Broadband Integrated Services Digital Network as defined in the late 1980s, and designed to integrate telecommunication networks. It can handle both traditional high-throughput data traffic and real-time, low-latency content such as telephony (voice) and video. ATM is a cell switching technology, providing functionality that combines features of circuit switching and packet switching networks by using asynchronous time-division multiplexing. ATM was seen in the 1990s as a competitor to Ethernet and networks carrying IP traffic, as it was faster and, unlike Ethernet, designed with quality-of-service in mind, but it fell out of favor once Ethernet reached speeds of 1 gigabit per second. In the Open Systems Interconnection (OSI) reference model data link layer (layer 2), the basic transfer units are called frames. In ATM, these frames are of a fixed length (53 octets) called cells.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.