Lesson plan
Atari 1050
The Atari 1050 is a floppy disk drive for Atari 8-bit computers released in June 1983. It is compatible with the 90 kB single-density mode of the original Atari 810 it replaced, and added a new "enhanced" or "dual density" mode that allows 130 kB on a disk. Based on a half-height Tandon mechanism, it is smaller than the 810 and matches the styling of 1200XL, 600XL, and 800XL machines. By the time it was available, a variety of third party drives had been introduced for the Atari 8-bit computers, many of which were faster and offered true double-density support for 180 kB. The lack of double-density support on the 1050 was a mystery to onlookers at the time, as the hardware had full support for this format. The launch was further marred by releasing it with the older Atari DOS 2.0S, S for "single", which does not support the 130 kB capacity. Atari eventually replaced 2.0 with DOS 3.0 which supported the enhanced density mode. However, it also uses an entirely new format that is incompatible with earlier disks. This led to further criticism and the widespread use of 3rd party DOSes. The release of DOS 2.5 in 1985 finally addressed these issues. The 1050 was launched directly into the rise of the Commodore 64 and the videogame crash of 1983 when sales of the 8-bit line plummeted.…
Article summary
The Atari 1050 is a floppy disk drive for Atari 8-bit computers released in June 1983. It is compatible with the 90 kB single-density mode of the original Atari 810 it replaced, and added a new "enhanced" or "dual density" mode that allows 130 kB on a disk. Based on a half-height Tandon mechanism, it is smaller than the 810 and matches the styling of 1200XL, 600XL, and 800XL machines. By the time it was available, a variety of third party drives had been introduced for the Atari 8-bit computers, many of which were faster and offered true double-density support for 180 kB. The lack of double-density support on the 1050 was a mystery to onlookers at the time, as the hardware had full support for this format. The launch was further marred by releasing it with the older Atari DOS 2.0S, S for "single", which does not support the 130 kB capacity. Atari eventually replaced 2.0 with DOS 3.0 which supported the enhanced density mode. However, it also uses an entirely new format that is incompatible with earlier disks. This led to further criticism and the widespread use of 3rd party DOSes. The release of DOS 2.5 in 1985 finally addressed these issues. The 1050 was launched directly into the rise of the Commodore 64 and the videogame crash of 1983 when sales of the 8-bit line plummeted.…
Key claims
- release date: 1983 — source: Wikipedia, revision 1375869026, retrieved 2026-10-20 · confidence 0.95
- release date: 1000 — source: Wikipedia, revision 1375869026, retrieved 2026-10-20 · confidence 0.95
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- The record states that the release date is "1983". What evidence would count against this claim?
- The record states that the release date is "1000". What evidence would count against this claim?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
- Wikipedia, “Atari 1050”, revision 1375869026, retrieved 2026-10-20 https://en.wikipedia.org/w/index.php?oldid=1375869026
Key claims and bibliography are generated from the same tracked claims and sources as the article page.