Lesson plan

Atari Message Information System

The Atari Message Information System (AMIS) was one of the first BBS (Bulletin Board System) software packages available for the Atari 8-bit computers. It was known to crash often and could not be left unattended for more than a few days. The AUTORUN.SYS file which contained the modem handler was at cause. Versions of the AMIS BBS were modified with the modem handler (written by Atari) supplied with the Atari XM301 modem and was deemed much more stable. The original AMIS BBS software was written in Atari BASIC by Tom Giese member of the MACE (Michigan Atari Computer Enthusiasts). The program included instructions for building a "ring detector" circuit for the board maintainer's modem (Atari 1030 modem) to enable it to answer incoming calls – modems at the time were most often capable of making outgoing calls, but not receiving incoming ones. The one exception being the Atari XM301 modem which had a ring detector built-in. A sector editor was required for the BBS maintainer to manually allocate message space on their disk, one hex byte at a time. As of March 2021, there is still an active AMIS BBS, called Amis XE, that one can connect to using telnet (amis86.ddns.net:9000) or a web client provided by the Telnet BBS Guide.

Back to article

Article summary

The Atari Message Information System (AMIS) was one of the first BBS (Bulletin Board System) software packages available for the Atari 8-bit computers. It was known to crash often and could not be left unattended for more than a few days. The AUTORUN.SYS file which contained the modem handler was at cause. Versions of the AMIS BBS were modified with the modem handler (written by Atari) supplied with the Atari XM301 modem and was deemed much more stable. The original AMIS BBS software was written in Atari BASIC by Tom Giese member of the MACE (Michigan Atari Computer Enthusiasts). The program included instructions for building a "ring detector" circuit for the board maintainer's modem (Atari 1030 modem) to enable it to answer incoming calls – modems at the time were most often capable of making outgoing calls, but not receiving incoming ones. The one exception being the Atari XM301 modem which had a ring detector built-in. A sector editor was required for the BBS maintainer to manually allocate message space on their disk, one hex byte at a time. As of March 2021, there is still an active AMIS BBS, called Amis XE, that one can connect to using telnet (amis86.ddns.net:9000) or a web client provided by the Telnet BBS Guide.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.