Lesson plan
Atari Program Recorder
The Atari Program Recorder is Atari's dedicated magnetic-tape data storage device for the Atari 8-bit computers. The original 410 was launched along with the Atari 400 and 800 machines in 1979. The 1010 was a smaller model introduced to match the styling of the XL series released in 1983. The XC11 and XC12 of 1986 matched the XE series and were sold mostly in eastern Europe and South America. Slight variations of all of these models were also introduced from time to time. The data rate was nominally 600 bit/s, but the simple error correction and short gaps between the resulting packets lowered this somewhat. In the end, its rate was roughly double that of the formats used by the Commodore Datasette or the TI-99/4. In some markets, where the Program Recorder was the only cost-effective storage solution, software-based high-performance modes were developed that operated more than three times as fast, and as much as four times as fast with simple hardware modifications. The drives had several features not commonly found on other platforms. The system's device driver supported a packet-based format with checksums for error detection, as opposed to lacking any error detection or using whole-file checksums. The driver included separate formats for binary data and more complex data that required longer to process it.…
Article summary
The Atari Program Recorder is Atari's dedicated magnetic-tape data storage device for the Atari 8-bit computers. The original 410 was launched along with the Atari 400 and 800 machines in 1979. The 1010 was a smaller model introduced to match the styling of the XL series released in 1983. The XC11 and XC12 of 1986 matched the XE series and were sold mostly in eastern Europe and South America. Slight variations of all of these models were also introduced from time to time. The data rate was nominally 600 bit/s, but the simple error correction and short gaps between the resulting packets lowered this somewhat. In the end, its rate was roughly double that of the formats used by the Commodore Datasette or the TI-99/4. In some markets, where the Program Recorder was the only cost-effective storage solution, software-based high-performance modes were developed that operated more than three times as fast, and as much as four times as fast with simple hardware modifications. The drives had several features not commonly found on other platforms. The system's device driver supported a packet-based format with checksums for error detection, as opposed to lacking any error detection or using whole-file checksums. The driver included separate formats for binary data and more complex data that required longer to process it.…
Key claims
- release date: 1983 — source: Wikipedia, revision 1373996372, retrieved 2026-10-20 · confidence 0.95
- release date: 1979 — source: Wikipedia, revision 1373996372, retrieved 2026-10-20 · confidence 0.95
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- The record states that the release date is "1983". What evidence would count against this claim?
- The record states that the release date is "1979". What evidence would count against this claim?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
- Wikipedia, “Atari Program Recorder”, revision 1373996372, retrieved 2026-10-20 https://en.wikipedia.org/w/index.php?oldid=1373996372
Key claims and bibliography are generated from the same tracked claims and sources as the article page.