Atkinson friction factor

Atkinson friction factor is a measure of the resistance to airflow of a duct.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Atkinson friction factor is a measure of the resistance to airflow of a duct. It is widely used in the mine ventilation industry but is rarely referred to outside of it. Atkinson friction factor is represented by the symbol k and has the same units as air density (kilograms per cubic metre in SI units, lbfmin^2/ft^4 in Imperial units).

It is related to the more widespread Fanning friction factor by k = \frac{1}{2}\rho f, in which \rho is the density of air in the shaft or roadway under consideration and f is Fanning friction factor (dimensionless). It is related to the Darcy friction factor by k = \frac{1}{2}\rho \frac{\lambda}{4}, in which \lambda is the Darcy friction factor (dimensionless).

It was introduced by John J Atkinson in an early mathematical treatment of mine ventilation (1862) and has been known under his name ever since.

Atkinson friction factor is a measure of the resistance to airflow of a duct. It is widely used in the mine ventilation industry but is rarely referred to outside of it. Atkinson friction factor is represented by the symbol k and has the same units as air density (kilograms per cubic metre in SI units, lbfmin^2/ft^4 in Imperial units).

It is related to the more widespread Fanning friction factor by k = \frac{1}{2}\rho f, in which \rho is the density of air in the shaft or roadway under consideration and f is Fanning friction factor (dimensionless). It is related to the Darcy friction factor by k = \frac{1}{2}\rho \frac{\lambda}{4}, in which \lambda is the Darcy friction factor (dimensionless).

It was introduced by John J Atkinson in an early mathematical treatment of mine ventilation (1862) and has been known under his name ever since.

See also

Atkinson resistance

References

NCB Mining Dept., Ventilation in coal mines: a handbook for colliery ventilation officers, National Coal Board 1979.

Further reading

1999 paper giving the derivation of k Atkinson, J J, Gases met with in Coal Mines, and the general principles of Ventilation Transactions of the Manchester Geological Society, Vol. III, p.218, 1862

Text derived from https://en.wikipedia.org/w/index.php?oldid=1051958451 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.