Lesson plan
Atomic hydrogen welding
Atomic hydrogen welding (AHW or Athydo ) is an arc welding process that uses an arc between two tungsten electrodes in a shielding atmosphere of hydrogen. The process was invented by Irving Langmuir in the course of his studies of atomic hydrogen. The electric arc efficiently breaks up the hydrogen molecules, which later recombine with tremendous release of heat, reaching temperatures from . Without the arc, an oxyhydrogen torch can only reach . This is the third-hottest flame after dicyanoacetylene at and cyanogen at . An acetylene torch merely reaches . This device may be called an atomic hydrogen torch, nascent hydrogen torch or Langmuir torch. The process was also known as arc-atom welding. The heat produced by this torch is sufficient to weld tungsten ( ), the most refractory metal. The presence of hydrogen also acts as a shielding gas, preventing oxidation and contamination by carbon, nitrogen or oxygen, which can severely damage the properties of many metals. It eliminates the need of flux for this purpose. The arc is maintained independently of the workpiece or parts being welded. The hydrogen gas is normally diatomic ( ), but where the temperatures are over near the arc, the hydrogen breaks down into its atomic form, absorbing a large amount of heat from the arc. When the hydrogen strikes a relatively cold surface (i.e.…
Article summary
Atomic hydrogen welding (AHW or Athydo ) is an arc welding process that uses an arc between two tungsten electrodes in a shielding atmosphere of hydrogen. The process was invented by Irving Langmuir in the course of his studies of atomic hydrogen. The electric arc efficiently breaks up the hydrogen molecules, which later recombine with tremendous release of heat, reaching temperatures from . Without the arc, an oxyhydrogen torch can only reach . This is the third-hottest flame after dicyanoacetylene at and cyanogen at . An acetylene torch merely reaches . This device may be called an atomic hydrogen torch, nascent hydrogen torch or Langmuir torch. The process was also known as arc-atom welding. The heat produced by this torch is sufficient to weld tungsten ( ), the most refractory metal. The presence of hydrogen also acts as a shielding gas, preventing oxidation and contamination by carbon, nitrogen or oxygen, which can severely damage the properties of many metals. It eliminates the need of flux for this purpose. The arc is maintained independently of the workpiece or parts being welded. The hydrogen gas is normally diatomic ( ), but where the temperatures are over near the arc, the hydrogen breaks down into its atomic form, absorbing a large amount of heat from the arc. When the hydrogen strikes a relatively cold surface (i.e.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.