Lesson plan
Atomic trap trace analysis
Atom Trap Trace Analysis (ATTA) is an extremely sensitive trace analysis method developed by Argonne National Lab (ANL). ATTA is used on long-lived, stable radioisotopes such as , , and . By using a laser that is locked to an atomic transition, a CCD or PMT will detect the laser induced fluorescence to allow highly selective, parts-per-trillion to parts-per-quadrillion concentration measurement with single atom detection. This method is useful for atomic transport processes, such as in the atmosphere, geological dating, as well as noble gas purification. ATTA measurements of noble gas elements are possible only if the atoms are excited to a metastable state prior to detection. The main difficulty to accomplishing this is the large energy gap (10-20 eV) between the ground and excited state. The current solution is to use an RF discharge, which is a brute force technique that is inefficient and leads to complications such contamination of the walls from ion sputtering and high gas density. A new scheme for generating a metastable beam which can achieve a cleaner, slower, and preferably more intense source would provide a substantial advance to ATTA technology. All-optical techniques have been considered, but have not yet been able to compete with the discharge source.…
Article summary
Atom Trap Trace Analysis (ATTA) is an extremely sensitive trace analysis method developed by Argonne National Lab (ANL). ATTA is used on long-lived, stable radioisotopes such as , , and . By using a laser that is locked to an atomic transition, a CCD or PMT will detect the laser induced fluorescence to allow highly selective, parts-per-trillion to parts-per-quadrillion concentration measurement with single atom detection. This method is useful for atomic transport processes, such as in the atmosphere, geological dating, as well as noble gas purification. ATTA measurements of noble gas elements are possible only if the atoms are excited to a metastable state prior to detection. The main difficulty to accomplishing this is the large energy gap (10-20 eV) between the ground and excited state. The current solution is to use an RF discharge, which is a brute force technique that is inefficient and leads to complications such contamination of the walls from ion sputtering and high gas density. A new scheme for generating a metastable beam which can achieve a cleaner, slower, and preferably more intense source would provide a substantial advance to ATTA technology. All-optical techniques have been considered, but have not yet been able to compete with the discharge source.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.