Lesson plan

Attachment Unit Interface

or an Ethernet hub). Note the sliding clip. EtherWorks LC (DE100) Ethernet controller. Note the jackposts (as opposed to a sliding clip). The Attachment Unit Interface (AUI) is a physical and logical interface defined in the IEEE 802.3 standard (additionally published in FIPS PUB 107) for 10BASE5 Ethernet and the earlier DIX standard. The physical interface consists of a 15-pin D-subminiature connector that links an Ethernet node's physical signaling to the Medium Attachment Unit (MAU), sometimes referred to as a transceiver. An AUI cable can extend up to , though often the MAU and data terminal equipment's (DTE) medium access controller (MAC) are directly connected, bypassing the need for a cable. In Ethernet implementations where the DTE and MAU are combined, the AUI is typically omitted. The IEEE 802.3 specification officially defines the AUI as an interconnect between a DTE and the MAU. However, devices like the DEC Digital Ethernet Local Network Interconnect (DELNI) provided hub-like functionality using AUI-compatible connectors. Additionally, under certain conditions, it was possible to directly connect two AUI devices without the need for transceivers using a crossover cable. AUI connectors became increasingly rare in the early 1990s as computers and hubs directly integrated the MAU, especially with the rising adoption of the 10BASE-T standard.…

Back to article

Article summary

or an Ethernet hub). Note the sliding clip. EtherWorks LC (DE100) Ethernet controller. Note the jackposts (as opposed to a sliding clip). The Attachment Unit Interface (AUI) is a physical and logical interface defined in the IEEE 802.3 standard (additionally published in FIPS PUB 107) for 10BASE5 Ethernet and the earlier DIX standard. The physical interface consists of a 15-pin D-subminiature connector that links an Ethernet node's physical signaling to the Medium Attachment Unit (MAU), sometimes referred to as a transceiver. An AUI cable can extend up to , though often the MAU and data terminal equipment's (DTE) medium access controller (MAC) are directly connected, bypassing the need for a cable. In Ethernet implementations where the DTE and MAU are combined, the AUI is typically omitted. The IEEE 802.3 specification officially defines the AUI as an interconnect between a DTE and the MAU. However, devices like the DEC Digital Ethernet Local Network Interconnect (DELNI) provided hub-like functionality using AUI-compatible connectors. Additionally, under certain conditions, it was possible to directly connect two AUI devices without the need for transceivers using a crossover cable. AUI connectors became increasingly rare in the early 1990s as computers and hubs directly integrated the MAU, especially with the rising adoption of the 10BASE-T standard.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.