ATX

Uses your system voice; voice and rate in settings.

Snapshot

≈ 9 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

form factors (pen for scale) ATX (Advanced Technology Extended) is a motherboard and power supply form factor and configuration specification developed by Intel. It aimed to improve on previous de facto standards such as the AT design. Originally released in July 19951, it was the first major change in desktop computer enclosure, motherboard and power supply design in many years, improving standardization and interchangeability of parts.

ATX as a motherboard standard defines the dimensions of the board, the mounting points to connect with the computer case, the input/output (I/O) connector panel, expansion slot placement, and power supply connectors. ATX as a power supply form factor defines the dimensions, electrical current, and cables of a desktop power supply, designed specifically to be compatible with ATX and similar motherboards. ATX is a commonly used motherboard and power supply hardware form factor for desktop computers.

The ATX form factor defined a general mounting point placement and I/O panel size that smaller motherboards share (such as microATX, FlexATX, and Mini-ITX), making them backwards compatible in many computer cases.

form factors (pen for scale) ATX (Advanced Technology Extended) is a motherboard and power supply form factor and configuration specification developed by Intel. It aimed to improve on previous de facto standards such as the AT design. Originally released in July 1995, it was the first major change in desktop computer enclosure, motherboard and power supply design in many years, improving standardization and interchangeability of parts.

ATX as a motherboard standard defines the dimensions of the board, the mounting points to connect with the computer case, the input/output (I/O) connector panel, expansion slot placement, and power supply connectors. ATX as a power supply form factor defines the dimensions, electrical current, and cables of a desktop power supply, designed specifically to be compatible with ATX and similar motherboards. ATX is a commonly used motherboard and power supply hardware form factor for desktop computers.

The ATX form factor defined a general mounting point placement and I/O panel size that smaller motherboards share (such as microATX, FlexATX, and Mini-ITX), making them backwards compatible in many computer cases.

ATX power supply revisions

ATX12V 1.1

This is a minor revision from August 2000. The power on the 3.3 V rail was slightly increased and other smaller changes were made.

ATX12V 1.2

A relatively minor revision from January 2002. The only significant change was that the −5 V rail was no longer required (it became optional). This voltage was required by the ISA bus, which is no longer present on almost all modern computers.

ATX12V 1.3

Introduced in April 2003 (a month after 2.0). This standard introduced some changes, mostly minor. Some of them are: Slightly increased the power on 12 V rail. Increased minimal efficiency for full load from 68% to 70% and defined minimal required PSU efficiencies for light (50% minimal efficiency) and typical (60% minimal efficiency) loads. Defined acoustic levels. Introduction of Serial ATA power connector (but defined as optional). Guidance for the −5 V rail was removed (but it was not prohibited).

ATX12V 2.0

The power demands of PCI Express were incorporated in ATX12V 2.0 (introduced in February 2003), which defined quite different power distribution from ATX12V 1.x: Most power is now provided on 12 V rails. The standard specifies that two independent 12 V rails (12 V 2 for the four-pin connector and 12 V 1 for everything else) with independent overcurrent protection are needed to meet the power requirements safely (some very high power PSUs have more than two rails; recommendations for such large PSUs are not given by the standard).

The power on 3.3 V and 5 V rails was significantly reduced. The ATX motherboard connector was extended to 24 pins. The extra four pins provide one additional 3.3 V, 5 V and 12 V circuit. The six-pin AUX connector from ATX12V 1.x was removed because the extra 3.3 V and 5 V circuits which it provided are now incorporated in the 24-pin ATX motherboard connector. The power supply is required to include a Serial ATA power cable. Minimum efficiency of 60% for light load, 70% for typical load, and 70% for full load Many other specification changes and additions

ATX12V 2.01

This is a minor revision from June 2004. An errant reference for the −5 V rail was removed. Other minor changes were introduced.

ATX12V 2.1

This is a minor revision from March 20051. The power was slightly increased on all rails. Efficiency requirements changed: minimum 65% at light load, 72% at typical load, and 70% at full load. Introduced recommended minimum values of 75% at light load, 80% at typical load, and 77% at full load.

ATX12V 2.2

Also released in March 2005 it includes corrections and specifies High Current Series wire terminals for 24-pin ATX motherboard and 4-pin +12 V power connectors.

ATX12V 2.3

Effective March 2007. Recommended efficiency was increased to 80% (with at least 70% required) and the 12 V minimum load requirement was lowered. Higher efficiency generally results in less power consumption (and less waste heat) and the 80% recommendation brings supplies in line with new Energy Star 4.0 mandates. The reduced load requirement allows compatibility with processors that draw very little power during startup. The absolute over-current limit of 240 VA per rail was removed, allowing 12 V lines to provide more than 20 A per rail.

ATX12V 2.31

This revision became effective in February 2008. It added a maximum allowed ripple/noise specification of 400 millivolts to the PWR_ON and PWR_OK signals, requires that the DC power must hold for more than 1 millisecond after the PWR_OK signal drops, clarified country-specific input line harmonic content and electromagnetic compatibility requirements, added a section about Climate Savers, updated recommended power supply configuration charts, and updated the cross-regulation graphs.

ATX12V 2.32

This is the unofficial name given to the later revisions of the v2.31 specifications, published in May 20201

ATX12V 2.4

The ATX12V 2.4 specifications were published in August 2012. It is specified in Revision 1.31 of the Power Supply Design Guide for Desktop Platform Form Factors, which names this as ATX12V version 2.4. In July 2012, revision 1.3 of the Power Supply Design Guide for Desktop Platform Form Factors made inclusion of the floppy drive connector optional, instead of mandatory.

ATX12V 2.51

The specifications for ATXV12 2.51 were released in September 20211 and introduced support for Alternative Low Power Mode (ALPM) which supersedes the traditional S3 power state. Windows 10 implements this functionality as Modern Standby.

ATX12V 2.52

The specifications for ATXV12 2.52 were released in October 2021 introduces minor changes to the standard, most notably it requires power supply manufacturers to ensure power supplies with Alternative Low Power Mode (ALPM) support are able to withstand power cycles every 180 seconds (480 times per day or 175,200 per year). Power supply fans are also recommended to turn on with at least a two second delay for an improved user experience. This version also stated that the floppy drive connector should be excluded from PSUs, as opposed to merely being optional, and marked that connector's section in the specification as "For Historical Reference Only".

ATX12V 2.53

The specifications for ATX12V 2.53 were released in December 2021 and constitute another minor update to the ATX standard. ATX12V 2.53 makes further recommendations on efficiency and references the Energy Star Computers Specification Version 8.0 which was finalized in April 2020.

ATX 3.x

The specifications for ATX 3.0 were released in February 20221. It includes the new 16-pin 12VHPWR connector that can deliver up to 600 W for H+ and up to 675 W in H++ to graphics cards. These incorporate data lines for components to negotiate power capabilities with the PSU so they do not draw more power than the PSU is capable of delivering. The specification also has more strict requirements for handling spikes, two times the nominal output for 100 microseconds.

The −12 V supply is now specified as optional on the ATX motherboard connector, and some PSU manufacturers (e.g. Corsair) have begun removing the −12 V supply from their PSUs. However, as of 2025, some motherboards (e.g. recent designs from ASRock) still use the −12 V supply - typically to power the amplifier for on-board audio - and functions that use it will not work as expected when paired with a PSU that does not provide a −12 V supply.

ATX 3.1 replaces the 12VHPWR power connector with the 12V-2x6 power connector and reduces required power loss hold-up time from 17 milliseconds to 12 milliseconds.

ATX12VO

Standing for ATX 12-volt-only, this is a new specification published by Intel in 20191, aimed at pre-built systems in the first run, and stricter power efficiency requirements by the California Energy Commission going into effect in 2021. Several OEMs were already using a similar design with proprietary connectors and this effectively standardizes those. Under this standard, power supplies provide only a 12 V output. ATX12VO introduces a new 10-pin connector to supply the motherboard, replacing the 24-pin ATX12V connector. This greatly simplifies power supplies, but moves DC-to-DC conversion and some connectors to the motherboard instead. Notably, SATA power connectors, which include 3.3 V and 5 V pins, need to move to the motherboard instead of being connected directly to the power supply. a. Connector pinout per Intel ATX12VO (12V Only) Desktop Power Supply Design Guide.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375890958 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “ATX” revision 1375890958 · retrieved 2026-10-20 release date (×8) · confidence 0.95 revision URL