Lesson plan

Audi Type M

The Audi Type M was a large car first presented at the Berlin Motor Show in 1923. It was developed by Erich Horn and produced by Audi between 1924 and 1928. The vehicle had a six-cylinder in-line engine with 4,655 cc of displacement. The engine incorporated several innovative features, including overhead valves. It developed a maximum of at 3,000 rpm. The engine had an eight-bearing crankshaft, with an early form of an intake air cleaning system, an elaborate system in which air passed through an oil-wetted filter in the lower part of the crankcase; the airflow was then pre-heated by the exhaust system, settled to eliminate turbulence, and supplied to the carburetor. Power was transmitted to the rear wheels through a four-speed transmission. The car had two leaf-sprung solid axles and four wheel hydraulic brakes; it one of the first German-made automobiles with hydraulic brakes, and the first Audi with four-wheel brakes. The Type M's first presentation, at the 1923 Berlin Motor Show, was accompanied by a press release which boasted that "Audi is one of those German automakers that believes doing the job properly is more important than price" („Die Audi-Werke zählen zu jenen deutschen Automobilfabriken, welche die Preisfrage hinter die konstruktive Aufgabe zurückstellen“). This approach may have helped to win the car more admirers, but paying customers were harder to find.…

Back to article

Article summary

The Audi Type M was a large car first presented at the Berlin Motor Show in 1923. It was developed by Erich Horn and produced by Audi between 1924 and 1928. The vehicle had a six-cylinder in-line engine with 4,655 cc of displacement. The engine incorporated several innovative features, including overhead valves. It developed a maximum of at 3,000 rpm. The engine had an eight-bearing crankshaft, with an early form of an intake air cleaning system, an elaborate system in which air passed through an oil-wetted filter in the lower part of the crankcase; the airflow was then pre-heated by the exhaust system, settled to eliminate turbulence, and supplied to the carburetor. Power was transmitted to the rear wheels through a four-speed transmission. The car had two leaf-sprung solid axles and four wheel hydraulic brakes; it one of the first German-made automobiles with hydraulic brakes, and the first Audi with four-wheel brakes. The Type M's first presentation, at the 1923 Berlin Motor Show, was accompanied by a press release which boasted that "Audi is one of those German automakers that believes doing the job properly is more important than price" („Die Audi-Werke zählen zu jenen deutschen Automobilfabriken, welche die Preisfrage hinter die konstruktive Aufgabe zurückstellen“). This approach may have helped to win the car more admirers, but paying customers were harder to find.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.