Audio power amplifier
(1984) An audio power amplifier (or power amp) amplifies low-power electronic audio signals, such as the signal from a radio receiver or an electric guitar pickup, to a level that is high enough for driving loudspeakers or headphones.
≈ 4 min read
Audio power amplifier. encyclopegia.org, snapshot enwiki-001378676128. /a/audio-power-amplifier
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
(1984) An audio power amplifier (or power amp) amplifies low-power electronic audio signals, such as the signal from a radio receiver or an electric guitar pickup, to a level that is high enough for driving loudspeakers or headphones. Audio power amplifiers are found in all manner of sound systems, including sound reinforcement, public address, home audio systems and musical instrument amplifiers like guitar amplifiers.
It is the final electronic stage in a typical audio playback chain before the signal is sent to the loudspeakers. The preceding stages in such a chain are low-power audio amplifiers, which perform tasks like pre-amplification of the signal, equalization, mixing different input signals.
The inputs can also be any number of audio sources like record players, CD players, digital audio players and cassette players. Most audio power amplifiers require these low-level inputs, which are line level.
While the input signal to an audio power amplifier, such as the signal from an electric guitar, may measure only a few hundred microwatts, its output may be a few watts for small consumer electronics devices, such as clock radios, tens or hundreds of watts for a home stereo system, several thousand watts for a nightclub's sound system or tens of thousands of watts for a large rock concert sound reinforcement system. While power amplifiers are available in standalone units, typically aimed at the hi-fi audiophile market (a niche market) of audio enthusiasts and sound reinforcement system professionals, many consumer electronics audio products such as an integrated amplifier, a receiver, clock radios, boomboxes and televisions have both a preamplifier and a power amplifier contained in a single chassis.
Filters and preamplifiers
Since modern digital devices, including CD and DVD players, radio receivers and tape decks already provide a "flat" signal at line level, the preamp is not needed other than as a volume control and source selector. One alternative to a separate preamp is to simply use passive volume and switching controls, sometimes integrated into a power amplifier to form an integrated amplifier.
Power output stages
sources to headphones or small speakers. Edge length 4 cm, mass , power output about 100 mW into a 32 Ω load. The final stage of amplification, after preamplifiers, is the output stage, where the highest demands are placed on the transistors or tubes.
For this reason, the design choices made around the output device (for single-ended output stages, such as in single-ended triode amplifiers) or devices (for push-pull output stages), such as the class of operation of the output devices is often taken as the description of the whole power amplifier. For example, a class-B amplifier will probably have just the high power output devices operating cut off for half of each cycle, while the other devices (such as differential amplifier, voltage amplifier and possibly even driver transistors) operate in class A. In a transformerless output stage, the devices are essentially in series with the power supply and output load (such as a loudspeaker), possibly via some large capacitor and/or small resistances.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378676128 under CC BY-SA 4.0; modifications have been made.