Audiogram

Article summary

An audiogram is a graph that shows the audible threshold for standardized frequencies as measured by an audiometer. The Y axis represents intensity measured in decibels (dB) and the X axis represents frequency measured in hertz (Hz). The threshold of hearing is plotted relative to a standardised curve that represents 'typical' hearing, in dB(HL) (hearing level). They are not the same as equal-loudness contours, which are a set of curves representing equal loudness at different levels, as well as at the threshold of hearing, in absolute terms measured in dB(SPL) (sound pressure level). The frequencies displayed on the audiogram are octaves, which represent a doubling in frequency (e.g., 250 Hz, 500 Hz, 1000 Hz, wtc). Commonly tested "inter-octave" frequencies (e.g., 3000 Hz) may also be displayed. The intensities displayed on the audiogram appear as linear 10 dBHL steps. However, decibels are a logarithmic scale, so that successive 10 dB increments represent greater increases in loudness. Hearing thresholds of humans and other mammals can be found with behavioural hearing tests or physiological tests used in audiometry. For adults, a behavioural hearing test involves a tester who presents tones at specific frequencies (pitches) and intensities (loudnesses). When the testee hears the sound he or she responds (e.g., by raising a hand or pressing a button).…

Key claims

No claims recorded.

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.