Austin Champ

The Austin Champ was a military and civilian jeep-like vehicle made by the Austin Motor Company in the 1950s.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Austin Champ was a military and civilian jeep-like vehicle made by the Austin Motor Company in the 1950s. The army version was officially known as "Truck, 1/4 ton, CT, 4×4, Cargo & FFW, Austin Mk.1" however the civilian name "Champ" was universally, if unofficially, applied to it. The majority of Champs produced went to the British Army.

The engine, fuel system and all electrical items were waterproofed so the vehicle could wade to a depth of with minimal preparation; a snorkel attached to the air cleaner and normally carried horizontally on the right wing (US = fender) could be raised during wading operations. Maintaining this level of capability was found to be expensive and of limited value, and the policy of CT vehicles was abandoned in 1956 and the CT family were downgraded to General Service (GS) status.

Electrical equipment fitted on military Champs was a 24-volt system in accordance with agreements reached in 1948 with the US and Canadian armies and comprised standardised military pattern equipment used on many British post-war vehicles, supplied by Lucas, CAV, Delco-Remy and Simms. Instrumentation was a system common to many other military vehicles of the period and supplied by Smiths Instruments of London.

The body was a utilitarian open four-seater tub of welded pressed steel panels, supplied by the Pressed Steel Company, and similar in style to the war-time Jeep layout although unlike the Jeep, the Champ body is designed to carry part of the vehicle stresses and chassis flexing. A simple hood (top) made from PVC coated cloth (trade name Rexine) was provided and a set of weather screens with hinged doors on a simple frame were available for issue in intemperate climates.

The inner windscreen opened forwards for ventilation or the whole frame and glass assembly could be folded down onto the bonnet (hood). Military items such as a shovel, pickaxe and a carrier for a standard 20-litre jerrycan (for the carriage of water not fuel) were normally fitted.

A 20-gallon (91 litre) fuel tank was located at the rear of the vehicle, giving an operational range of approximately 300 miles. Various bolt-on kits were produced to convert basic vehicles for specialist roles, for example tactical radio carrier, telephone line laying, field ambulance with two stretchers, and an appliqué armour kit.

Strangely, the armour components were listed in the Austin civilian parts catalogue but not in the army one. A standard radio fitting kit for 1/4-ton vehicles comprising a 50-inch table running on sliding runners, battery mountings and appropriate fittings was introduced in 1956.

When this kit was fitted, the vehicle was re-designated as Fitted For Radio (FFR) to differentiate it from the basic FFW version. Some prototype vehicles with a Land Rover-style rear body with tailgate rear access were constructed in an attempt to improve the versatility of the basic design but were not put into production.

Austin Memories Austin Champ Owners' Club

Text derived from https://en.wikipedia.org/w/index.php?oldid=1363127314 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.